background image

GB

'

Personalisation

Setting  the  temperature

Turn the TEMPERATURE knob to set the wash temperature (see 

Table of wash cycles

).

The temperature may be lowered, or even set to a cold wash ( ).

The  washing  machine  will  automatically  prevent  you  from  selecting  a  temperature  which  is  higher  than  the

maximum  value  set  for  each  wash  cycle.

Setting  the  spin  speed

Turn the SPIN SPEED knob to set the spin speed for the selected wash cycle.

The maximum spin speeds available for each wash cycle are as follows:

Wash  cycles

Maximum spin speed

Cottons

1400 rpm

Synthetics

800 rpm

Wool

600 rpm

Silk

drain  only

The spin speed may be lowered, or the spin cycle can be excluded altogether by selecting the symbol  .

The washing machine will automatically prevent you from selecting a spin speed which is higher than the

maximum  speed  set  for  each  wash  cycle.

Functions

The various wash functions available with this washing machine will help to achieve the desired results, every time.

To  activate  the  functions:

1. Press the button corresponding to the desired function;

2. the function is enabled when the corresponding indicator light is illuminated.
Note: If the indicator light flashes rapidly, this signals that this particular function may not be selected in

conjunction  with  the  selected  wash  cycle.

Reduced  creases

By selecting this function, the wash and spin cycles will be modified in order to reduce the formation of

creases. At the end of the cycle the washing machine will perform slow rotations of the drum; the REDUCED

CREASES and START/PAUSE indicator lights will flash (orange) and the 

 phase will remain lit in a fixed

manner. To end the cycle, press the START/PAUSE button or the REDUCED CREASES button.

For the 

Silk 

(10) and

 Lingerie 

(8) wash cycles, the machine will end the cycle while the laundry is soaking, the

REDUCED CREASES and START/PAUSE indicator lights will flash (orange) and the RINSE phase will remain lit in

a fixed manner. To drain the water so that the laundry may be removed, press the START/PAUSE button or the

REDUCED  CREASES  button.

 

This function may not be used in conjunction with wash cycles 6, 9, 11, 12, 13, B, C.

Mini  load

This function is recommended for when the load of laundry is equal to half, or less than half, of the maximum

recommended  load 

(see  Table  of  wash  cycles).

 This function may not be used in conjunction with wash cycles 5, 11, 12, 13, B, C.

Extra  rinse

By  selecting  this  function,  the  efficiency  of  the  rinse  is  increased  and  optimal  detergent  removal  is

guaranteed.  It  is  particularly  useful  for  sensitive  skin.

 

This function may not be used in conjunction with wash cycles B, C.

Super  Wash

Because a greater quantity of water is used in the initial phase of the cycle, and because of the increased

cycle  duration,  this  function  offers  a  high-performance  wash.

 

This function may not be used in conjunction with wash cycles 5, 8, 9, 10, 11, 12, 13, A, B, C.

Summary of Contents for WML 740 A

















Reviews: