background image

6

GB

Detergent dispenser drawer: 

used to dispense deter-

gents and washing additives 

(see “Detergents and laundry”)

.

There is a key which provides a summary of the available 
wash cycles inside the detergent dispenser drawer; this may 
be consulted at any time.

ON/OFF 

button  : press this briefly to switch the ma-

chine on or off. The START/PAUSE indicator light, which 
flashes slowly in a green colour shows that the machine is 
switched on. To switch off the washing machine during the 
wash cycle, press and hold the button for approximately 2 
seconds; if the button is pressed briefly or accidentally the 
machine will not switch off. If the machine is switched off 
during a wash cycle, this wash cycle will be cancelled.

WASH CYCLE SELECTOR 

buttons: used to set the 

desired wash cycle 

(see “Table of wash cycles”)

.

MEMORY 

button: press and hold the button to store a 

cycle with your own set of preferences in the memory of 
the machine. To recall a previously stored cycle, press the 
MEMORY button.

FUNCTION 

buttons: press the button to select the 

desired function. The corresponding indicator light on the 
display will switch on.

SPIN 

button  : press to reduce or completely exclude 

the spin cycle - the value is indicated on the display.

TEMPERATURE 

button 

: press to decrease the tem-

perature: the value will be shown on the display.

CHILD LOCK 

button: to activate the control panel lock, 

press and hold the button for approximately 2 seconds. 
When the symbol is illuminated, the control panel is locked. 
This means it is possible to prevent wash cycles from 
being modified accidentally, especially where there are 
children in the home. To deactivate the control panel lock, 
press and hold the button for approximately 2 seconds.

DELAY START 

button 

: press to set a delayed start 

time for the selected wash cycle. The delay time will be 
shown on the display.

START/PAUSE 

button with indicator light: when the gre-

en indicator light flashes slowly, press the button to start a 
wash cycle. Once the cycle has started the indicator light 
will remain lit in a fixed manner. To pause the wash cycle, 
press the button again; the indicator light will flash in an 
orange colour. If the symbol 

 is not illuminated, the door 

may be opened. To start the wash cycle from the point at 
which it was interrupted, press the button again.

Standby mode

This washing machine, in compliance with new energy sa-
ving regulations, is fitted with an automatic standby system 
which is enabled after about 30 minutes if no activity is 
detected. Press the ON-OFF button briefly and wait for the 
machine to start up again.

Description of the washing machine

Control panel

TEMPERATURE

 

button

WASH 

CYCLE 

SELECTOR 

buttons

Detergent dispenser drawer

FUNCTION 

buttons

ON/OFF

 

button

SPIN SPEED 

button

START/PAUSE

 

button with 

indicator light

CHILD LOCK 

button

DISPLAY

DELAY  

START 

button

MEMORY 

button

Summary of Contents for WMD 9692 A

















Reviews: