background image

20

Options

PROGR

AMMES

& OPTIONS

Any of the following optional wash features can be selected after the wash programme
selection, with the exception of ‘Fast Forward’, which can only be activated after the
wash   programme has started.

To choose an optional wash feature, press the option button once or in some cases
scroll through the options given in the display window.

How Dirty

This option allows the washing machine to take into account how dirty the 
washing is. You can select ‘Normal’, ‘Heavy’ or ‘Light’ load soil level and the 
selected wash programme is modified accordingly.
This option is set automatically to ‘Normal’ soiling which will be displayed adjacent
to the ‘How Dirty’ button. Repeated pressing of the ‘How Dirty’ button allows you 
to scroll through the ‘Normal’,‘Heavy’ and ‘Light’ soiling settings. When you select 
the  ‘Heavy’ option, the machine will automatically do a pre-wash prior to your 
chosen programme. You will therefore need to add detergent to the pre-wash 
compartment in addition to the main wash compartment.
This is not available with the  Rinse and Spin programmes.
Also ‘Heavy’ soiling cannot be selected for the Wool, Silk and Handwash     
programmes.
On the Quickwash programme only ‘Light’ soiling is available

Pre Wash

This option provides a short wash cycle, at 30˚, before the selected wash    
programme starts. It is used to loosen the heavy soil deposits on clothes. It is
recommended that detergent is also used in the Prewash compartment.
To use this option press the ‘Pre-Wash’ option button once and          illuminates in 
the display window above the ‘Pre-Wash’ option button.
Press again to cancel the option.
This option is not available with Wool, Silk, Handwash, Quickwash and the 
Rinse and Spin programmes.

Mini Load

Select this option for washing a smaller load.
In addition to reducing actual washing time, this option will reduce the water 
and energy consumption by up to 50%.
To use this option, press the ‘Mini Load’ option button once and           illuminates 
in the display window above the ‘Mini Load’ option button.
Press again to cancel the option.
Note: You can reduce the amount of detergent you use with this wash.
This option is available with all programmes.

Reduce Creases

This option reduces the wash action and spin speed meaning less ironing for 
delicate clothes. 
To use this option press the ‘Reduce Creases’ option button 
once and          illuminates in the display window above the ‘Reduce Creases
option button. Press again to cancel the option.
This option is not available with Cotton, Wool and Handwash.

Option buttons

ULTIMA BOOK 1666200010-02  04/07/2001  4:02 pm  Page 20

Summary of Contents for Ultima WMA62





























Reviews: