background image

Option Modifiers and
Special Features

14

GB

Special features

!

Not all special features can be used on all programmes - 

(

see Programme Table for option availability

).

Fast Wash: 

The Fast Wash programmes are designed for lightly soiled loads delivering quick results for smaller loads, using 
less energy. For loads with stains or increased soil levels which require deeper cleaning, use the standard or 
intensive wash cycles.

Wash & Dry:

On most programmes a wash cycle can be immediately followed by a drying cycle. To select this simply select 
the desired wash programme and then select a drying time or an auto dryness level and the appropriate 
temperature for the drying cycle (default is LOW heat, press the Drying Heat option button for cottons).
Press the START/CANCEL button and the wash cycle will start and when complete, the drying cycle will automatically
commence.

Note: The maximum capacity for a Wash & Dry load is:

- Cottons

5kg

- Synthetics

3kg

Handwash: 

A gentle action programme for delicate items and items labelled as hand wash only.
Not for Wool or Silk garments (use the special programmes for those materials).

Handwash Wool Approved: 

The wool wash cycle on Hotpoint machines has been tested and approved by the Woolmark Company for washing
garments labelled as ‘hand wash’, provided that the ‘garments’ are washed in accordance to the instructions 
issued by the manufacturer of this machine.
- Select the wool programme (

see Programme Table and Option Modifiers

).

!

We recommend using a wool wash liquid when using Wool programmes.

Super Silent Wash:

Using the latest brush-less electric motors and damper technology the noise levels during the washing phase
are significantly lower than a conventional machine.

LCD Display

Shows all information relating to your programme selections. Also indicating the stage of a programme in
progress.
If Time Delay is selected, this shows the time remaining until the start of the wash programme in hours –
counting down each hour.
It also displays which option modifiers have been selected, the door lock status and the time to end of the wash
programme in hours and minutes counting down each minute.

!

Please note time can go up as well as down depending on load absorbency, load size and water temperature.

Note: We recommend that if you use colour catcher sheets in your appliance that these only be used inside 
a wash bag, as otherwise they can affect the performance of your machine.

Did you know?…

… when an option button is selected the corresponding light is illuminated.

… if the option selected is incompatible with the programme selected, the button will flash and the option will
not be enabled.

… if you set an option that is incompatible with an option selected previously, only the last option selected will
be enabled.

Summary of Contents for Ultima LCD

























Reviews: