Hotpoint UH6F1CWUK, Instructions For Use Manual

Page: 5 / 24

5
2. FUNCTIONS
2.1. SMART DISPLAY*
This function can be used to save energy. Please follow
the instructions contained in the Quick Start Guide to
activate/deactivate the function. Two seconds after
activation of the Smart Display, the display goes off.
To adjust the temperature or use other functions, it
is necessary to activate the display by pressing any
button. After about 15 seconds without performing any
action, the display goes off again. When function is
deactivated the normal display is restored. The Smart
Display is automatically disabled after a power failure.
Remember that this function does not disconnect the
appliance from the power supply, but only reduce the
energy consumed by external display.
Note: The declared appliance energy consumption
refers to operation with the Smart Display function
activated. This function is available only on the model
with User Interface on the door.
2.2. PROFREEZE
ProFreeze function works to maintain the right
temperature in the following cases:
- Door opened for a while
The function activates when door opening causes the
internal temperature to increase to values that do not
ensure safe storage of food and remains active until
optimal storage conditions have been restored.
- Fresh food stored in the freezer
The function activates when fresh food is placed in
the freezer and remains active until optimal freezing
conditions are reached so as to ensure the best
freezing quality with the lowest power consumption.
Note: Besides the quantity of food loaded into the
freezer, ambient temperature and the quantity of
food already inside the freezer affect the duration of
ProFreeze function. Therefore significant duration
variations are quite normal.
2.3. ON/STAND BY
This function turns On/Stand-by the freezer
compartments. To put the product in Stand-by, press &
hold the On/Stand-by button for 3 seconds. When
the appliance is in Stand-by, the light inside the freezer
compartment does not work. Remember that this
operation does not disconnect the appliance from the
power supply. To switch the appliance On again, simply
press the On/Stand-By button .
2.4. BLACK OUT ALARM
After a power blackout, your product is designed to
automatically monitor the temperature in the freezer
when electricity is resupplied. If the temperature in
the freezer rises above freezing level, the Black Out
indicator turns on, the Alarm indicator blinks
and the acoustical alarm sounds when electricity is
resupplied.
To reset the alarm press the Stop Alarm button just
once.
In case of Black Out Alarm, the following actions are
recommended:
• If the food in the freezer is unfrozen but still cold, all
the food in the freezer should be eaten within the
next 24 hours.
• If the food in the freezer is frozen, this indicates the
food was thawed and then refrozen when electricity
was re-supplied which degrades taste, quality
and nutritional value and also could be unsafe. It
is recommended to not consume the food but to
dispose of the entire content of the freezer. The
Black Out Alarm is designed to provide guidance on
food quality in the freezer in the event of electricity
black out. This system does not guarantee food
quality or safety and consumers are advised to use
their own judgment in evaluating food quality in
freezer compartment.
*Available on selected models only. Please check on the QUICK START GUIDE if this function is actually available on your model.