Hotpoint UH6F1CW1, Instructions For Use Manual

Page: 6 / 24

6
2.5. TEMPERATURE ALARM
The acoustic alarm sounds and temperature indicator
(°C) blinks. The alarm is activated when:
• The appliance is connected to the power supply
after prolonged disuse
• The freezer compartment temperature is too high
• The quantity of fresh foods loaded into the freezer
exceeds that indicated on the rating plate
• The freezer door has been left open for a long time.
To mute the alarm buzzer press Stop Alarm button
just once. The Alarm indicator is automatically
turned-off as soon as the freezer compartment reaches
a temperature below -10°C and the temperature set
indicator (°C) stop blinking and shows the chosen
setting.
2.6. DOOR OPEN ALARM
The Alarm icon lights up blinking and the acoustic
alarm sounds. The alarm is activated when the door
is left open for more than 2 minutes. To disengage the
door alarm close the door, or press once Stop Alarm
button to mute the acoustic alarm.
2.7. FAST FREEZE*
The amount of fresh food (in kg) that can be
frozen in 24 hours is indicated on the appliance
rating plate.
This function can be used for optimum appliance
performance, 24 hours before placing fresh food in the
freezer Please follow the instructions contained in the
Quick Start Guide to activate/deactivate the function.
After placing fresh food in the freezer, 24 hours on Fast
Freeze function is generally sufficient; After 50 hours
the Fast Freeze function automatically deactivates.
Attention:
In order to save energy, when freezing small amounts
of food, the fast freeze function can be deactivated
after a few hours.
2.8. ECO NIGHT FUNCTION
(NIGHT TIME RATE) *
The Eco Night function enables appliance energy
consumption to be concentrated in the reduced rate
hours (generally at night), when electricity is readily
available and costs less than during the daytime (only
in countries that utilise a time based multi-rate system -
check energy rates with the local electricity company).
To activate the function, press the button at the
reduced rate start time (depending on the specific
rates plan). For example, if the reduced rate starts at
8 p.m., press the button at that time. When the Eco
Night indicator is ON, the function is ON. Once
the function is activated, the appliance automatically
adapts energy consumption according to the time
selected, i.e. consuming less energy during the day
than at night.
IMPORTANT: To operate properly, the function must
be on during the night and day. The function remains
on until deactivated (or it is deactivated in case of a
power failure or appliance switch-off). To deactivate
the function, press the button again. When the
Eco Night indicator is OFF, the function is OFF.
Note: The declared appliance energy consumption
refers to operation with the Eco Night function
deactivated.
*Available on selected models only. Please check on the QUICK START GUIDE if this function is actually available on your model.