background image

Ser

vice

Spare Parts

This dryer is a complex machine. Repairing it yourself
or having a non-authorised person try to repair it could
cause harm to one or more persons, could damage
the machine and could invalidate the spare parts 
warranty.
Call an authorised technician if you experience problems
while using the machine.
The spare parts have been designed exclusively for
this appliance and not for other uses.

Service

14

GB

Before calling the Service Centre:

Use the troubleshooting guide to see if you can 
solve the problem yourself (

see Troubleshooting

).

If not, turn off the dryer and call the Service Centre 
closest to you.

What to tell the Service Centre:

name, address and post code.

telephone number.

the type of problem.

the date of purchase.

the appliance model (Mod.).

the serial number (S/N).

This information can be found on the data label inside
the door of the machine.

Comparative Programmes

Programmes recommended for comparative test to EN61121

!

Note: This is not a full list of programme options (

see Start and Programmes

).

Programme

Programme to select

Load size

(EN61121)

Dry Cotton

2 Cottons - Cupboard Dry

6 kg

Iron Dry Cotton

4 Cottons - Iron Dry

6 kg

Easy-care textile

5 Synthetics - Cupboard Dry

3 kg

This appliance conforms to the following EC Directives:

- 2006/95/EC (Low Voltage Equipment) 
- 89/336/EEC, 92/31/EEC and 93/68/EEC (Electromagnetic Compatibility)

Summary of Contents for TVF760

















Reviews: