7
Dryer Description
The
Progress or Delay
lights show you the status of
the programme, or the delay time when they flash.
During a delayed start the lights flash to show the
delay selected. When (not flashing) they show each
stage of the programme by the corresponding light
turning on (
see Start and Programmes
).
The
Empty Water
indicator light signals that the water
container should be emptied. The light will take a few
seconds to go out after replacing the empty water
container, the dryer must be running for this to happen
(
see The Controls
).
Note:
If the water bottle fills the indicator light flashes, the
heat is turned off and your clothes will not dry.
The
Clean Filter
light gives you a reminder before
every programme that it is essential to clean the filter
every time the dryer is used (
see Maintenance and Care
).
The
Clean Condenser
light gives you a reminder that
it is essential to clean the condenser at regular intervals
(
see Maintenance and Care
).
The
ON/OFF
button : If the dryer is running and
this button is pressed and held for more that 3 seconds
the dryer is turned off, the programme is then cancelled.
Press and hold for more than 3 seconds and the dryer
reactivates.
The
PROGRAMMES
knob sets the programme: rotate
it until the indicator is pointing to the programme you want
to select or to Timed Drying (
see Start and Programmes
).
Use the
DRYING LEVELS
knob to set your required
dryness sensing level, or the
TIMER DRYING
knob to
select a drying time (
see Start and Programmes
).
The
OPTION
buttons/lights select available options for
your selected programme. The lights indicate that the
option has been selected (
see Start and Programmes
).
The
START/PAUSE
button/light starts a selected
programme. When you press this button there will be
one beep and the progress lights will flash to confirm
the action. When a programme is running, pressing this
button in pauses the programme and stops the dryer.
The light is green when programme is running, flashing
amber if the programme has been paused or flashing
green if on standby waiting to start a programme (
see
Start and Programmes
).
Note:
This light also flashes amber during the Post
Care phase of a programme.
Control panel
Empty Water
Light
PROGRAMMES
Knob
START/PAUSE
Button & Light
Indicator
Progress or Delay
Lights
OPTION
Buttons & Lights
Clean Filter
Light
Clean Condenser
Light
DRYING LEVELS
Knob
TIMER
DRYING
Knob
ON/OFF
Button
The features
Water container
Filter
Condenser cover
Rating plate
Model & Serial numbers
Condenser cover handle
(Pull to open)
Air intake grille
Installation
W
a
rnings
Maintenance
and Care
Description
Star
t and
Pr
ogrammes
Laundr
y
T
roub
leshooting
Pr
oduct data
Ser
vice
GB
