Hotpoint TB 05 UK, Operating Instructions Manual

Page: 7 / 12

77
en
accessories or
approaching parts that
move in use.
24. This appliance shall not
be used by children.
Keep the appliance and
its cord out of reach of
children.
25. Appliances can be used
by persons with reduced
physical, sensory or
mental capabilities or
lack of experience and
knowledge if they have
been given supervision
or instruction
concerning use of the
appliance in a safe way
and if they understand
the hazards involved.
26. Children shall not play
with the appliance.
OPERATING INSTRUCTIONS
BEFORE THE FIRST USE
1. Before the first use, unpack the appliance and
place all parts on a horizontal surface.
2. The jar assembly (including measuring cup, lid,
gasket 1, jar unit, gasket 2 , blade assembly )
has already been assembled into the motor unit.
Disassemble to wash all detachable parts except
the motor unit. Refer to the chapter CARE AND
CLEANING.
3. Once all the pieces have been cleaned and dry
thoroughly, reassemble.
ASSEMBLING THE BLENDER
4. Holding the jar handle, invert the jar onto a level
surface, put the jar base onto the jar bottom and
secure the jar base by turning it clockwise until
tight (See Fig.1).
5. Place the gasket 2 and the blade assembly
onto the jar and secure the jar base by turning it
anticlockwise until tight (See Fig.2).
6. Place the jar assembly with its opening upwards.
Wrap the gasket 1 around the lid bottom and put
the lid onto the jar assembly. Place the measure
cup exactly into the lid by fitting the small
projection on the both sides of the cup into the
slots of the lid and turning the cup clockwise until
tight. (See Fig.3)
7. Finally, place the assembled jar onto the motor
unit by aligning the arrow symbol on the jar
base to the unlock symbol on the motor unit and
turning the jar clockwise until tight. (See Fig.4
and 4a).
Attention: Do not try to twist the jar and jar base
onto motor unit.
USING THE BLENDER
1. Peel or pit fruit or vegetables and then cut it into
small dices.
2. Place the food to be blended into the jar (See
Fig.5).
Note: Usually, certain amount of purified water
has to be added to make the running of trhe
appliance smoother. The suggested proportion of the
food and water is 2:3.The amount of mixture should
not exceed the max level as indicated on the jar.
Attention : never use boiling liquids or run the
appliance empty.
3. Put the lid on the jar. Be sure the measuring cup
is in place.
4. Plug the power cord into a standard wall outlet.
5. Turn the speed knob to the selected speed.
6. For quick or delicate blending tasks, turn the
speed knob to P position and hold for a few
seconds and then release; the knob will reset to
0 position automatically. Operate several times
until the desired consistence.
7. If you want to add ingredients while the blender
is working, remove the measuring cup and place
through the lid opening. (See Fig.6)
8. When crushing ice or hard food, keep one hand
firmly on the lid.
9. When the consistence you desire is obtained,