background image

EN

3

ON/STANDBY FUNCTION

To put the product in Stand-by, 

press and hold the On/

Stand By button for 3 seconds

.

 All the indicators turn off 

except On/Standby indicator.  

Press again to reactivate the appliance. 

SMART DISPLAY

This optional function can be used to save energy. To activate 

the Smart Display, press Fridge Temperature and Party Mode 

buttons at the same time for 3 seconds until an audible 

signal sounds. To deactivate this function repeat the same 

procedure. Remember that this function does not disconnect 

the appliance from the power supply, but only reduce the 

power consumed by external display.

TEMPERATURE SETTING 

To adjust the Fridge Temperature, press the Fridge 

Temperature button. The Fridge Temperature can be 

adjusted b2°C and + 8°C, as shown by the Fridge 

Temperature LEDs.

PARTY MODE

Press to activate/deactivate the Party Mode function. Use this 

function to chill drinks inside the freezer compartment.

Important: 

do not leave the bottle inside the freezer 

compartment longer than the function is active (30 minutes)

KEY LOCK

To lock/unlock the keys of the Control Panel, press the Party 

Mode button for 3 seconds: the Key Lock indicator will be 

displayed for a short time and an acoustical signal will be 

played. 

PRO FRESH

This function automatically works to ensure the optimal 

conditions to preserve the stored food. If there are any 

variations, Pro Fresh immediately restores the ideal 

conditions. Results are outstanding: freshness preserved at 

best throughout the fridge cavity up to 4 times longer.

FAST COOL FUNCTION 

Using Fast Cool function it is possible to increase the cooling 

in the refrigerator compartment. The use of this function is 

recommended when placing a very high quantity of food 

in the refrigerator compartment. Press the Fast Cool button 

to activate Fast Cool function. When activated, the Fast Cool 

indicator will turn on. The function is automatically disabled 

after 6 hours, or can be manually disabled by pressing Fridge 

°C button.

REFRIGERATOR LIGHT

The light system inside the refrigerator compartment uses 

LEDs light, allowing a better lightning as well as a very low 

energy consumption.

If the LED light system does not work, please contact the 

Service to replace it.

Important:

 

The refrigerator compartment light switches 

on when the refrigerator door is opened. If the door is kept 

open for more then 10 minutes the light will be automatically 

switched off.

FAN + ANTIBACTERIAL FILTER

The Fan improves temperature distribution inside the 

refrigerator compartment, allowing better preservation of 

stored food. If the appliance has the Fan it can be equipped 

with the antibacterial filter.

Remove it from the box placed in the crisper drawer and 

insert into the fan cover - as in the picture.

The replacement procedure is included in the filter box.

ALARM TABLE

ALARM TYPE Signal

Cause

Cure

Door open 

alarm

The acoustical alarm is activated 

and the Alarm Indicator blinks.

The Fridge or Freezer door has 

remained open for more than 2 

minutes.

Close the door or press the Stop 

Alarm to mute the acoustical alarm.

Temperature 

alarm

The acoustical alarm is activated 

and the Alarm Indicator remains 

on.

Inside the Freezer the temperature 

is not adequate

Press the Stop Alarm button ; 

the acoustical alarm stops, the 

Alarm Indicator remains on until a 

temperature < -10°C is reached.

Party Mode 

alarm

The Party Mode Indicator blinks 

and the acoustical alarm is 

activated.

30 min. elapsed since Party Mode 

function has been activated. It is 

time to take out the bottle from 

the freezer (see Use and Care 

Guide for more details).

Press the Party Mode button to stop 

the alarm.

Long black-out 

alarm

The Black Out Alarm icon remains 

on, the Alarm indicator blinks.

Prolonged power failure, able to 

cause the inside temperature to 

increase to 0°C.

Press the Stop Alarm button ; the 

acoustical alarm stops.

Malfunction

3 central LEDs in the Fridge 

Temperature LEDs blinks on the 

display.

Product malfunction.

Contact the After-sales Service.

DAILY USE 

FUNCTIONS

See Use and Care Guide for more details on functions / see 

last page for information on how to obtain the Use and Care 

Guide

Reviews: