Hotpoint SI E40 BA0, Operating Instructions Manual, Page: 30 / 96

30
it en
• You are using a too-high temperature. Clean the soleplate (see
chapter “Cleaning and maintenance”, section “Cleaning”).
• You are using starch. You can use starch directly on the inside out of
the fabrics and in any case never in the water reservoir.
• The garment was not washed correctly or has some soap residues.
• You are ironing a new garment that was not washed for the first time.
• Not enough water in the water reservoir. Fill the water reservoir.
The soleplate is dirty or dark
and may stain the fabrics.
The spray function does not
work.