Hotpoint SE87PX Instructions For Installation And Use Manual Download Page 9

9

GB

Programming your cooking

!

 Select a cooking mode before programming.

Programming Time

Press the 

 button, then:

1. Adjust by turning the THERMOSTAT knob.
2. Press button 

 to store the setting.

3. When the selected time has elapsed, END appears

on the display and a buzzer sounds.

4. The buzzer can be stopped by pressing any button.

The END message disappears when the

THERMOSTAT knob returns to position “0”.

• For example: it is 9:00 a.m. and a time of 1 hour

and 15 minutes is programmed. The programme

stops automatically at 10:15 a.m.

Programming End

Press button 

 and repeat steps 1 to 4 as

described in the Programming Time procedure.

• For example: it is 9:00 a.m. and an end time of

10:15 a.m. is programmed. The duration is 1 hour

and 15 minutes.

Programming Delayed Cooking

1. Press button 

 and repeat steps 1 to 4 as

described in the Programming Time procedure.
2. Then press button 

 and set the end time.

• For example: it is 9:00 a.m. and a time of 1 hour

and 15 minutes is programmed and the end time is

set to 12:30. The programme starts automatically at

11:15 a.m.

The icon 

 shows that programming has been set.

To cancel programming, turn the SELECTOR knob to

position “0”.

Practical cooking advice

!

 Do not place racks in position 1 and 5 during fan-

assisted cooking. Excessive direct heat can burn

temperature sensitive foods.

!

 In the BARBECUE and GRATIN cooking modes,

particularly when using the rotisserie, place the

dripping pan in position 1 to collect cooking residues

(fat and/or grease).

MULTI-COOKING

• Use position 2 and 4, placing the food that requires

more heat on 2.

• Place the dripping pan on the bottom and the rack

on top.

BARBECUE

• Insert the rack in position 3 or 4. Place the food in

the centre of the rack.

• We recommend that you set the maximum power

level. The top heating element is regulated by a

thermostat and may not always be on.

PIZZA MODE

• Use a light aluminium pizza pan. Place it on the

rack provided.

For a crispy crust, do not use the dripping pan

(prevents crust from forming by extending cooking

time).

• If the pizza has a lot of toppings, we recommend

adding the mozzarella cheese on top of the pizza

halfway through the cooking process.

Summary of Contents for SE87PX

















Reviews: