When cooking a food for the first
time in your new oven, use the time
given on recipes as a guide. Oven
may “drift” from the
factory setting over the years, and
5 to 10-minute differences in timing
between an old and new oven are
not unusual. You might think your
new oven is not performing
satisfactorily; however, it has been
set correctly at the factory and is
more likely to be accurate than the
oven it replaced.
How to Set Oven for Baking
Step 1: Place food in oven, being
certain to leave about 1 inch of space
between pans and walls of oven for
good circulation of heat. Close oven
door. During baking, avoid
door openings to prevent undesirable
results.
Step 2: To set oven: Close oven
door.
OVEN SET to BAKE
and OVEN TEMP to temperature
on recipe or in Baking Guide.
Check foods for doneness
at minimum time on recipe. Cook
longer if necessary. Switch off heat
and remove foods.
How to
Bake
Oven timer controls are designed to
turn oven on and off automatically
at specific times you want baking to
start and stop.
examples
of Immediate Start (set oven to turn
on now and off later, automatically)
and Delay Start and Stop (set oven
to turn on automatically at later
time and turn off automatically at
preset stop time).
How to Set Immediate
Start and Automatic Stop
Before beginning, make sure the
oven
shows correct time of day.
Step 2: To set Stop Time, push in
knob on Stop dial and turn pointer
to time you want oven to turn off;
for example,
This means
your recipe called for 2 hours
of baking time.
NOTE: Time on Stop dial must be
later than time shown on oven clock
and Start dial.
Step 1: The Start dial should be at
the same position as the time of day
on clock. To set Stop Time, push in
knob on Stop dial and turn pointer
to time you want oven to turn off;
for example,
Step 3: Turn OVEN SET knob to
TIME BAKE. Turn OVEN TEMP
knob to recommended temperature.
Step 2: Turn OVEN SET knob to
TIME BAKE. Turn OVEN TEMP
knob to desired oven temperature;
for example
The oven will
start heating immediately and
stop at the time you have set.
How to Set Delay Start
and Stop
Step 1: To set Start Time, push in
knob on Start dial and turn pointer
to time you want oven to turn on;
for example,
6
OVEN
LIGHTS at TIME BAKE setting
work differently than they do at
BAKE setting. Do not be concerned
if no light appears. Carefully
recheck the steps given above. If
operations are done as explained,
oven will operate as it should.
Step 4: Place food in oven, close
the door and the oven will be
turned on and off automatically at
the times you have set. When food
is done, turn OVEN SET to OFF
and remove food from oven.
