Hotpoint RD 966 J Instructions For Use Manual Download Page 8

8

GB

Detergent dispenser drawer

used to dispense 

detergents and washing additives 

(see “Detergents and 

laundry”)

.

Programme Key:

 the Programme Key inside the deter-

gent dispenser shows all the available programmes toge-

ther with a graphical guide on how to use the individual 

dispenser compartments.

ON/OFF 

button  : press this briefly to switch the ma-

chine on or off. The START/PAUSE indicator light, which 

flashes slowly in a green colour shows that the machine 

is switched on. To switch off the washer-dryer during the 

wash cycle, press and hold the button for approximately 3 

seconds; if the button is pressed briefly or accidentally the 

machine will not switch off. If the machine is switched off 

during a wash cycle, this wash cycle will be cancelled.

WASH CYCLE SELECTOR KNOB

:

 used to set the desired 

wash cycle (see “

Table of programmes and wash cycles

”).

FUNCTION 

button: press the button to select the desired 

function. The corresponding indicator light on the display 

will switch on.

AUTO CLEAN 

button

press to clean the machine’s inter-

nal parts

 

(see “Cleaning the washer-dryer”).

DIRECT INJECTION 

button: press to select the DIRECT 

INJECTION option. 

MULTI RINSE 

button 

 

:

 press to select the desired 

rinse type.

 

SPIN 

button  : press to reduce or completely exclude 

the spin cycle - the value is indicated on the display.

TEMPERATURE 

button  : press to decrease the tempe-

rature: the value will be shown on the display.

DRYING 

button

 

:

 press to decrease or exclude drying; 

the selected drying level or time will appear on the display.

DRY ONLY 

(DRYING ONLY)

 

button

 

:

 press to run the 

drying cycle only.

KEY LOCK 

button 

: to 

activate

 the control panel 

lock, press and hold the button for approximately 2 

seconds. When the display visualises “KEY LOCK ON” the 

control panel is locked (apart from the ON/OFF button). 

This means it is possible to prevent wash cycles from 

being modified accidentally, especially where there are 

children in the home. To 

deactivate

 the control panel lock, 

press and hold the button for approximately 2 seconds.

DELAY 

button 

: press to set a delayed start time for 

the selected wash cycle. The delay time will be shown on 

the display.

START/PAUSE 

button with indicator light: when the gre-

en indicator light flashes slowly, press the button to start a 

wash cycle. Once the cycle has started the indicator light 

will remain lit in a fixed manner. To pause the wash cycle, 

press the button again; the indicator light will flash in an 

orange colour. If the symbol 

is not illuminated, the door 

may be opened. To start the wash cycle from the point at 

which it was interrupted, press the button again.

Standby mode

This washer-dryer, in compliance with new energy saving 

regulations, is fitted with an automatic standby system 

which is enabled after about 30 minutes if no activity is 

detected. Press the ON-OFF button briefly and wait for the 

machine to start up again.

Consumption in off-mode: 0,5 W

Consumption in Left-on: 8 W

Description of the washer-dryer

Control panel

TEMPERATURE

 

button

Detergent dispenser drawer

FUNCTION 

button

ON/OFF

 

button

SPIN 

button

START/PAUSE

 

button with indicator light

KEY LOCK 

button

DELAY   

button

MULTI  

RINSE 

button

DISPLAY

AUTO 

CLEAN

button

DIRECT 

INJECTION

button

Programme  
Key

WASH 

CYCLE 

SELECTOR 

KNOB

DRY ONLY 

(DRYING ONLY) 

button

DRYING 

button

Summary of Contents for RD 966 J

















Reviews: