Hotpoint PSLCSE 65F AS X Instructions For Use Manual Download Page 6

English  

 

 

 

EN 

 

  GENERAL SAFETY 

• Before any cleaning or maintenance operation, 

disconnect hood from the mains by removing the plug 

or disconnecting the mains electrical supply.  
• Always wear work gloves for all installation and 

maintenance operations. 
• This appliance can be used by children aged from 8 

years and above and persons with reduced physical, 
sensory or mental capabilities or lack of experience 

and knowledge if they have been given supervision or 
instruction concerning use of the appliance in a safe 

way and understand the hazards involved. 
• Children shall not be allowed to tamper with the 

controls or play with the appliance.  
• Cleaning and user maintenance shall not be made 

by children without supervision. 
• The premises where the appliance is installed must 

be sufficiently ventilated, when the kitchen hood is 
used together with other gas combustion devices or 

other fuels.  
• The hood must be regularly cleaned on both the 

inside and outside (AT LEAST ONCE A MONTH). 
• This must be completed in accordance with the 

maintenance instructions provided. Failure to follow 
the instructions provided regarding the cleaning of the 

hood and filters will lead to the risk of fires. 
• Do not flambé under the range hood.  

• For lamp replacement use only lamp type indicated 
in the Maintenance/Replacing lamps section of this 

manual. 

The use of exposed flames is detrimental to the filters and may cause a fire risk, 
and must therefore be avoided in all circumstances.  
Any frying must be done with care in order to make sure that the oil does not 
overheat and ignite. 
CAUTION:

 

Accessible parts of the hood may become hot when used with 

cooking appliances. 
• Do not connect the appliance to the mains until the installation is fully complete.  
• With regards to the technical and safety measures to be adopted for fume 
discharging it is important to closely follow the regulations provided by the local 
authorities. 
• The air must not be discharged into a flue that is used for exhausting fumes 
from appliance burning gas or other fuels.  
• Do not use or leave the hood without the lamp correctly mounted due to the 
possible risk of electric shocks. 
• Never use the hood without effectively mounted grids. 
• The hood must NEVER be used as a support surface unless specifically 
indicated. 
• Use only the fixing screws supplied with the product for installation or, if not 
supplied, purchase the correct screws type. 
• Use the correct length for the screws which are identified in the Installation 
Guide. 
• In case of doubt, consult an authorized service assistance center or similar 
qualified person.  
 

 WARNING!  

 

•  Failure to install the screws or fixing device in accordance with these 

instructions may result in electrical hazards. 

 

•  Do not use with a programmer, timer, separate remote control system or 

any other device that switches on automatically. 

  

The hood can look different to that illustrated in the drawings in this 
booklet. The instructions for use, maintenance and installation, however, 
remain the same. 
Closely follow the instructions set out in this manual. 

All responsibility,  for 

any eventual inconveniences, damages or fires caused by not complying with the 
instructions in this manual, is declined. This appliance is intended to be used in 
household and similar application such as: - staff kitchen areas in shop, offices 
and other working environments; - farm houses; - by clients in hotels, motels and 
other residential type environments; - bed and breakfast type environments.  

• 

It is important to conserve this booklet for consultation at any moment. In 
the case of sale, cession or move, make sure it is together with the product.   

• 

Read the instructions carefully: there is important information about 
installation, use and safety.  

• 

Do not carry out electrical or mechanical variations on the product or on the 
discharge conduits. 

• 

Before proceeding with the installation of the appliance verify that there are 
no damaged all components. Otherwise contact your dealer and do not 
proceed with the installation. 

  
The minimum distance between the supporting surface for the cooking 
equipment on the hob and the lowest part of the range hood must be not less 
than 65cm from electric cookers and 75cm from gas or mixed cookers. 
If the instructions for installation for the gas hob specify a greater distance, this 
must be adhered to. 
Expansion wall plugs are provided to secure the hood to most types of 
walls/ceilings. However, a qualified technician must verify suitability of the 
materials in accordance with the type of wall/ceiling. The wall/ceiling must be 
strong enough to take the weight of the hood.  

Do not tile, grout or silicone this appliance to the wall. Surface mounting 
only. 

Summary of Contents for PSLCSE 65F AS X













Reviews: