Hotpoint NV4D01P Instruction Booklet Download Page 4

DISPOSAL OF OLD ELECTRICAL APPLIANCES

The European Directive 2012/19/EC on Waste Electrical and Electronic Equipment (WEEE) requires that old household electrical appliances must 

not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimise the recovery 

and recycling of the materials they contain and reduce the impact on human health and the environment. 

The crossed out “wheeled bin” symbol on the product reminds you of your obligation that when you dispose of the appliance it must be 

separately collected. Consumers should contact their local authority or retailer for information concerning the correct disposal of their old 

appliance.

19516126900

11/2019

OUR ADVISORS WILL REQUIRE THE 

FOLLOWING INFORMATION:

• 

name, address and postal 

code

• 

telephone number

• 

type of malfunction

• 

date of purchase

• 

model number

• 

serial number

• 

This information can be 

found on the data plate 

located behind the door.

INFORMATION ON RECYCLING 

AND DISPOSAL

 

  

As part of our continual commitment towards environmental protection, 

we reserve the right to use recycled quality components to reduce costs 

for our customers and to minimise materials wastage.
• Disposing of the packaging materials: follow local regulations to allow 

for recycling of packaging materials.
• In order to minimise the risk of injury to children, remove the door 

and plug, then cut the power supply cord flush with the appliance.   

Dispose of these parts separately to prevent the appliance from being 

connected to a power supply socket.

SAVE ENERGY AND RESPECT 

THE ENVIRONMENT

Wring out all items to eliminate excess water before  tumble drying (if 

you use a washing machine first, select a high spin cycle). Doing this will 

save time and energy during drying.
Always dry full loads - you save energy: single items or small loads 

take longer to dry. Clean the filter after each use to contain energy 

consumption costs  

Repairs and After Sales

For product help and advice, repairs, spare parts or
accessories, we’re here to help.

For local repair engineers - 

03448 111 606

ROI -

 0818 313 413

UK standard local rate applies

ROI local Irish rate applies

For Parts and Accessories visit:

parts.hotpoint.co.uk/shop

Please remember to register your appliance at 

www.hotpointservice.co.uk 

to activate your 10 year parts guarantee.

How to find your model and serial number:

Power Consumption

Off-mode (Po) - Watts

0.00

Left-on mode (Pl) - Watts 

0.00

Programmes

Kg

kWh

Minutes

Standard  Cotton

*  

4

2.95

101

Standard  Cotton  

2

1.40

51

Synthetics

2

0.84

35

*This is the reference programme for the energy 

label and suitable to dry normal wet cotton laundry. 

This is the most efficient programme in terms of 

energy consumption for drying wet cotton laundry.

Summary of Contents for NV4D01P

Page 1: ...F FILTER You must clean the fluff filter after EVERY drying cycle Step 1 Open the door of your dryer remove the filer Step 2 Clean any fluff deposits from the filter mesh and refit the filter Step 3 Make sure the filter is pushed fully home NEVER run the dryer without the filter in position Failure to clean the filter after EVERY drying cycle will affect the drying performance of your machine To r...

Page 2: ...ere are still warm items inside Clean the filter after each use see Maintenance Do not allow lint to collect around the dryer Never climb on top of the dryer It could result in damage Always follow electrical standards and requirements see Installation Always buy original spare parts and accessories see Service TO MINIMIZE THE RISK OF FIRE IN YOUR TUMBLE DRYER THE FOLLOWING SHOULD BE OBSERVED Tumb...

Page 3: ...nting to the drying time you want to select Set the program knob to OFF to switch off the machine CHOOSING A PROGRAMME 1 Plug the dryer into the electrical socket 2 Sort your laundry according to fabric type 3 Open the door and make sure the filter is clean and in place 4 Load the machine and make sure items are not in the way of the door seal Close door 5 Set the temperature with the HEAT button ...

Page 4: ...o allow for recycling of packaging materials In order to minimise the risk of injury to children remove the door and plug then cut the power supply cord flush with the appliance Dispose of these parts separately to prevent the appliance from being connected to a power supply socket SAVE ENERGY AND RESPECT THE ENVIRONMENT Wring out all items to eliminate excess water before tumble drying if you use...

Reviews: