EN
3
Fitting a new plug
IMPORTANT
:::::
WIRES IN THE MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE...
Green and Yellow - Earth
Blue - Neutral
Brown - Live
As the colours of the wires in the mains lead may
not correspond with the coloured markings
identifying the terminals in your plug, proceed as
follows:
-
Connect Green and Yellow wire to terminal
marked 'E' or
or coloured
Green and
Yellow.
-
Connect Brown wire to terminal marked 'L' or
coloured red or brown.
-
Connect Blue wire to terminal marked 'N' or
coloured Black or Blue.
If a 13amp plug (BS 1363) is used it must be
fitted with a 13amp fuse. A 15amp plug must be
protected by a 15amp fuse, either in the plug or
adaptor or at the distribution board.
If you are in any doubt about the electrical
supply to your machine, consult a qualified
electrician before use.
CE Marking certifies that this appliance
conforms to the following EEC directives :
Low Voltage Equipment - 73/23/EEC & 93/68
EEC
Electromagnetic Compatibility 89/336/EEC, 92/
31/EEC & 93/68/EEC
Summary of Contents for NCD 191 I
Page 11: ...EN 11 ...
Page 12: ...12 EN 195053322 02 03 2011 ...
