9 of 40
Indesit
Company
Service Manual UK
English
SETTING THE WATER HARDNESS
These models have 5 Water Hardness Settings depending on the water supply where the machine
is located.
The Water Hardness Setting must be set:
- before the machine is used for the first time,
- if a new Module has been fitted or if the machine is moved to a different water area.
Use the above water hardness setting table to determine Water Hardness and do the following:
1.
Switch on and off the dishwasher using the ON/OFF button.
2.
Press and hold the P button for a few seconds until you hear a beep.
3.
Switch on the dishwasher with the ON/OFF button, the set level appears on the display (the
water softening system is set by default to level 3).
4.
Adjust the water hardness level with the P button, (1-2-3-4-5* see water hardness table) up to a
max. of 5 levels.
5.
Press the ON/OFF button to save the adjustment setting.
Note:
Even if using multi-functional tablets,
the salt dispenser should still be filled
.
RINSE AID ADJUSTMENT
The Rinse Aid Setting has to be Electronically set.
Starting condition:
Make certain the machine is Off at the Console but power is applied at the wall socket.
1.
Switch the machine on (On/Off button)
2. Switch the machine off (On/Off button)
3.
Press the Start/Pause Button 3 times
4.
Switch the machine on (On/Off button)
5.
Adjust the level of rinse aid using the knob
6.
Confirm by switching the machine off (On/Off button)
Note:
if the machine is not switched off by pressing the On/Off button, then at the end of a 10-
second Time Out the appliance will abort the procedure automatically, without any change to the
previous rinse aid setting.
Select wash cycle button
Salt indicator light
Rinse aid indicator light
Water Hardness Setting
ON-OFF/Reset button
and indicator light
Water hardness setting table:
Display
No.
Hardness
(
Clarke
)
Notes
1
0 - 7
Salt not needed
2
7.7 - 14
Add Salt
3
14.7 - 21
Add Salt
4
21.7 - 42
Add Salt
5
42 - 63
Add Salt
