Care and Cleaning
USER
INSTRUCTIONS
Turn air conditioner off and
remove plug from wall outlet
before cleaning.
Grille & Cabinet
Wipe front grille with a clean cloth
lightly dampened with mild liquid
detergent. Wash
cabinet with mild soap or detergent
and lukewarm water.
Coils
These coils on the weather side
of the unit should be checked
periodically and cleaned if clogged
with dirt or soot from the atmosphere.
If extremely soiled, they may need
to be steam cleaned, a service
through your GE service outlet.
Air Filter
The air filter behind the inlet grille
should be washed at least every 30
days or as often as it needs cleaning.
To remove the filter, grasp the tab
on the filter and pull to the right.
Vacuum the filter on the
side
Front Grille Removal
The model and serial numbers are
on a label on the right hand side
front of the cabinet and/or behind
the front grille on the front edge of
the base-pan (for service use).
CABINET
To
the grille:
The grille is attached on front of
the cabinet by four tabs and a screw.
1. Remove air filter from the grille
by sliding it to right.
2. Engage two tabs on the grille’s
top inside edge with two slots in the
cabinet front edge.
3. Press inward on the lower right
side of the metal cabinet at the
location of the slot and then carefully
push the grille in until the tab
engages with the slot.
Do not strike or forcibly hit the
plastic grille otherwise damage to
the
will occur.
to remove light dust. Wash the filter,
4. Repeat this process for the lower
cleaner side up, under gently flowing
left side.
water to wash out accumulated dust
and lint. If the filter is very dirty,
5. Mount the grille on front of the
use a mild household detergent in
cabinet with the screw attached to
the wash water. Let the filter dry
grille during shipping, and slide the
thoroughly before replacing it.
filter back into
When replacing the filter, be sure
the word FRONT is facing you as
you slide the filter back into place.
To remove the grille:
1. Remove air filter from the grille
by sliding it to right.
2. Remove and save the screw that
holds the grille to the chassis.
3. Press inward on the lower right
side of the cabinet until the tab is
clear of the slot and allow the
to come toward you slightly.
4. Repeat this process for the lower
left side.
Do not pull the bottom edge
toward you more than 3 inches as
damage to the top 2 tabs of the
grille may occur.
5. Grasp the grille’s lower right and
left corner and carefully lift straight
upward to disengage the 2 top tabs
from their slots in the cabinet front
edge.
6
.-. . . . . . . . .