Hotpoint HV8B 593 Instructions For Use Manual Download Page 11

11

GB

Personalisation

Setting the temperature

Turn the TEMPERATURE knob to set the wash temperature 

(see Table of wash cycles).

The temperature may be lowered, or even set to a cold wash ( ).
The washing machine will automatically prevent you from selecting a temperature which is higher than the maximum value 
set for each wash cycle.

Functions

The various wash functions available with this washing machine will help to achieve the desired results, every time.
To activate the functions:
1. Press the button corresponding to the desired function;
2. The function is enabled when the corresponding indicator light is illuminated.
Note: If the indicator light flashes rapidly, this signals that this particular function may not be selected in conjunction with the 
selected wash cycle.

Spin Exclusion

The washing machine will not carry out the spin cycle, but rather a drum spin at medium speed to assist water draining. 
Recommended when washing garments which are difficult to iron.

!

 

This function may not be used in conjunction with wash cycles 12, C.

Reduced creases

By selecting this function, the wash and spin cycles will be modified in order to reduce the formation of creases. At the end of 
the cycle the washing machine will perform slow rotations of the drum; the REDUCED CREASES and START/PAUSE indi-
cator lights will flash (orange) and the 

 phase will remain lit in a fixed manner. To end the cycle, press the START/PAUSE 

button or the REDUCED CREASES button. 
For the 

Silk

 and 

Lingerie

 wash cycles, the machine will end the cycle while the laundry is soaking, the REDUCED CREASES 

and START/PAUSE indicator lights will flash (orange) and the RINSE phase will remain lit in a fixed manner. To drain the water 
so that the laundry may be removed, press the START/PAUSE button or the REDUCED CREASES button.

!

 

This function may not be used in conjunction with wash cycles 6, 7, 9, 10, 13, A, B, C.

Extra rinse

By selecting this function, the efficiency of the rinse is increased and optimal detergent removal is guaranteed. It is particularly 
useful for sensitive skin.

!

 

This function may not be used in conjunction with wash cycles 6, 7, B, C.

Super Wash

Because a greater quantity of water is used in the initial phase of the cycle, and because of the increased cycle duration, this 
function offers a high-performance wash.

!

 This function may not be used in conjunction with wash cycles 6, 7, 11, 12, 13, B, C.

Summary of Contents for HV8B 593

















Reviews: