Firetide - Reliable Connectivity Anywhere
13
January 2011
Alerts
Syslog Configuration
This page lets you configure the settings to connect to a Syslog server.
Enable Syslog:
Enable the Syslog settings, if you have a Syslog server on your network.
Syslog Server IP Address:
Enter the IP address to which the FWC2050 and managed Access Points will send all SysLogs, if
SysLog option is enabled.
Port:
Enter the port number at which your Syslog server is configured to listen to requests.
Alarm Actions
This screen lets you define actions to be taken for the four defined alarm conditions. For each condition, you can do nothing,
write to syslog, or generate an email to a defined email address.
Alarm Email Configuration
Alarm messages via email require that a mail server be defined.
Server Address:
Enter the address or name of the mail server (e.g. smtp.firetide.com)
Port:
Enter the port on which the mail server receives mail.
User Name:
Enter the ‘user name’ that identifies the Controller that is sending the message.
Password:
Enter the email system password defined for the account.
