8
GB
Using the refrigerator to its full potential
• Adjust the temperature using the display.
• Press the SUPER COOL button (rapid cooling) to
lower the temperature quickly. For example, when you
place a large number of new food items inside a
fridge the internal temperature will rise slightly. The
function quickly cools the groceries by temporarily
reducing the temperature until it reaches the ideal
level.
• Place only cold or lukewarm foods in the compartment,
not hot foods (
see Precautions and tips).
• Remember that cooked foods do not last longer than
raw foods.
• Do not store liquids in open containers. They will
increase humidity in the refrigerator and cause
condensation to form.
Using the freezer to its full potential
• Adjust the temperature using the display.
• To freeze foods safely and correctly, follow the
instructions below: place the food in the FREEZER
and STORAGE compartment, making sure that it
does not come into contact with any food that has
already been frozen; press the rapid-freezing SUPER
FREEZE button (the corresponding LED lights up)
and close the door. The function deactivates
automatically after 24 hours or when the inside of the
compartment has reached the optimal temperature
(the LED switches off).
• Do not re-freeze food that is defrosting or that has
already been defrosted. These foods must be cooked
and eaten (within 24 hours).
• Fresh food that needs to be frozen must not come into
contact with food that has already been defrosted.
• Do not place glass bottles which contain liquids, and
which are corked or hermetically sealed in the freezer
because they could break.
• The maximum quantity of food that may be frozen daily
is indicated on the data plate located inside one of the
compartments (for example: Kg/24h: 4).
!
Do not open the freezer door during freezing.
!
If there is a power cut or malfunction, do not open the
freezer door. This will help maintain the temperature inside
the freezer, ensuring that foods are conserved for at least
9 -14 hours.
WATER LEVEL
MAX
W
A
TER LEVEL
MAX
W
A
TER LEVEL
MAX
ICE CARE tray
The fact that they are situated on the top part of the
freezer drawers ensures greater cleanliness: the ice no
longer comes into contact with the food placed inside
the freezer compartment; furthermore, the dripping of
the water during filling is avoided (a lid to cover up the
hole after filling with water is also provided).
1. Pull out the tray by pushing it up.
Check that the tray is completely empty and fill it with
water through the opening provided.
2. Take care not to exceed the level indicated (MAX
WATER LEVEL). Excess water prevents the ice cubes
from dispensing (if this happens, wait for the ice to
melt and empty the tray).
3. Turn the tray 90°: due to the connected compartments
each mould fills with water (
see diagram).
4. Close the opening with the lid provided and put the
tray back, placing the top part in the corresponding
housing and allowing it to drop in again.
5. When the ice has formed (minimum time
approximately 8 hours) knock the tray against a hard
surface and warm the outside so that the ice cubes
come loose and take them out through the opening.
