background image

7

EN

Loading the racks

Only available in selected models.

 

The number and position

may vary.

Upper rack

Load this rack with delicate and lightweight crockery: glasses,
cups, saucers and shallow salad bowls.

Adjustable position tip-up compartments

The tip-up compartments
can be positioned at
different heights, to optimise
the arrangement of
crockery throughout the
rack. Wine glasses can be
placed safely in the tip-up
compartments, by inserting
the stem of each glass into
the

corresponding slots.

Adjusting the height of the upper rack

In order to make it easier to arrange the crockery, the upper rack
may be moved to a higher or lower level.

 The height of the upper rack should ideally be adjusted

WHEN THE RACK IS EMPTY.
NEVER raise or lower the rack on one side only.

Open the left and right guide rail stops
and pull out the rack; position it higher or
lower as required, slide it along the guide
rails until the front wheels are in place and
close the stops (

see figure

).

If the rack is fitted with 

Dual Space

handles

*

 (

see figure

), pull out the upper

rack until it reaches its stop point, grip
the handles at the sides of the rack and
move it upwards or downwards, then
slowly let it fall back into place.

Items that should not be washed in the dishwasher

• Wooden items, objects with wooden or horn handles or glued-

on parts.

• Items made from aluminium, copper, brass, pewter or tin.

• Items made from plastic material which is not heat-resistant.

• Antique or hand-painted porcelain.

• Antique silver. Silver that is not antique may, however, be

washed in the dishwasher using a delicate wash cycle,
provided that it does not come into contact with other metals.

 Before loading the racks, remove all food residue from

crockery and empty liquids from glasses and cups.

After loading the appliance, make sure that the sprayer arms
can rotate freely.

Lower rack and cutlery basket

The lower rack can hold pans, lids, plates, salad bowls, cutlery, etc.
Large plates and lids should ideally be placed at the sides of the rack.

Several dishwasher models are fitted with tip-up sections

*

, which

can be used in a vertical position when arranging plates or in a
horizontal position when arranging saucepans, salad bowls and
frying pans.

The type of cutlery basket may vary (modular or non-modular)
according to the dishwasher model. The non-modular basket
must 

only

     be positioned at the front of the lower rack.

Both are fitted with
grilles over the top,
for improved cut-
lery arrangement.

 Knives and other

utensils with sharp edges must be placed in the cutlery basket

with the points facing downwards, or they must be positioned
horizontally in the tip-up compartments on the upper rack.

 We recommend the use of crockery which is dishwasher

safe.

Summary of Contents for FDFF 1110 FUTURA

















Reviews: