26
GB
If something
goes wrong ...
Disposal of your product
To minimise the risk of injury to children please
dispose of your product carefully and safely.
Remove all doors and lids. Remove the mains cable
(where fitted) by cutting off flush with the appliance
and always ensure that no plug is left in a condition
where it could be connected to the electricity
supply.
To help the environment, Local Authority instructions
should be followed for the disposal of your product.
Disposal of old electrical appliances
The European Directive 2002/96/EC on Waste
Electrical and Electronic Equipment (WEEE),
requires that old household electrical appliances
must not be disposed of in the normal unsorted
municipal waste stream. Old appliances must be
collected separately in order to optimise the
recovery and recycling of the materials they contain
and reduce the impact on human health and the
environment.
The crossed out "wheeled bin" symbol on the
product reminds you of your obligation, that when
you dispose of the appliance it must be separately
collected.
Consumers should contact their local authority or
retailer for information concerning the correct
disposal of their old appliance.
PROBLEM
CHECK
Timer is flashing '
00.00
'
The power supply to your oven has possibly been interrupted, but
has now come back on again. Reset the timer to the correct time of
day using the instructions given in the timer section of the book.
Oven temperatures too high or low
Check temperature and shelf positions are as recommended in the
Oven Temperature Charts. It may be necessary to increase or
decrease the recommended temperature slightly to suit your taste.
Oven does not cook evenly
Check:
(a) Temperature and shelf positions are as recommended in the
Oven Temperature Charts
(b) Oven utensils being used allow sufficient air flow around them.
Oven light does not work
The oven light is not covered by the guarantee. The part is easily
changed (see section 'Replacement of Oven Light'). A new light
bulb may be obtained from our Parts department see Key
Contacts, back page.
Draught from beneath control panel
A gentle flow of air will be blown from beneath the control panel
when the appliance is used. If the appliance is still warm, this
cooling fan may run on, or restart itself when all controls have been
turned off. The fan will stop once the appliance has been cooled.
This is normal and not a fault.
Steam / Condensation in the oven after use.
Steam is a by - product of cooking any food with a high water
contact. To help minimise always:
(a) Try to avoid leaving food in the oven to cool after being cooked.
(b) Use a covered container, wherever possible.