background image

 

 

 Solver

PROBLEM

DRYER WON’T
START

 

TOO LONG 

 

GENERAL

POSSIBLE CAUSE AND  REMEDY

● 

Dryer unplugged. Make sure power cord is plugged in.

● 

No power to dryer. Check fuses and circuit breakers to make sure dryer is getting

current. Most electric dryers use two.

 Controls improperly set. Make sure controls are set and START switch is turned.

Opening the door during operation stops the dryer. Tore-start, close the door and turn
the START switch.

● 

Dryer door is open. Close door securely—dryer will not run with door open.

. Circuit is overloaded. 

 not operate other appliances on the same electrical outlet

or circuit while the dryer is operating.

● 

Controls improperly set. Check   controls to make sure they are correctly set for

the load you want to dry. Seepages 5-7.

. Clogged lint filter. Remove and clean filter before every load. Periodically clean area
under lint filter with vacuum cleaner. See page 13.

● 

Improper 

 Make sure dryer is 

 in accordance with Installation

Instructions.

● 

Obstruction in exhaust 

 Make sure 

 is clean and free of obstruction;

make sure damper in outside wall cap operates easily. If flexible 

 is used, be

sure it is 

 kinked and is properly 

 according to Installation Instructions.

● 

Blown fuses or tripped circuit breakers. Check household fuses or circuit breakers.

Most electric dryers use two.   is possible for one to be blown or tripped and the dryer

 tumble without heat.

● 

 sorting. Do not mix heavy, hard-to-dry items with lightweight articles.

. Large loads of moisture-holding fabrics, such as beach towels, take along time to
remove moisture.

● 

Too many items in dryer. Dry 

 one 

 load at a time. Do not combine loads.

● 

Too few items in dryer. If drying only one article, add two more similar articles, even

if dry, to insure proper tumbling.

● 

Some fabrics 

 shrink whether machine 

 and tumble dried or washed by hand

and drip dried; others may be safely washed but will shrink in a dryer. Follow Garment
Manufacturers’ Care Labels 

 If in doubt, do not machine wash   tumble dry.

10

Summary of Contents for DLB2750B

















Reviews: