Depending on the selected function, it could be
needed to add / stir / turn food during cooking.
In these cases the oven will pause cooking and
it will ask you to perform the needed action.
When required, you should:
1. Open the door.
2. Add or Stir or Turn the food (depending on
the required action).
3. Close the door and restart by pressing JET
START button.
Notes: if the door is not opened within 2 minutes
from the request to Add or Stir or Turn the food,
the microwave oven will continue the cooking
process (in this case the final result may not be
the optimal one).
Add / stir / turn FOOd
stArt PrOtECtiOn / CHiLd LOCK
This automatic safety function is activated one
minute after the oven has returned to “Stand-
by mode”.
When the safety function is active the door must
be opened and closed in order to start the cook-
ing, otherwise the display will show “door”.
PAusE Or stOP COOKinG
To pause cooking:
The cooking can be paused to check, add or
turn or stir the food by opening the door. Press
STOP button once ,the functions can be paused
as what they are,press STOP button twice,the
functions stopped.
The setting will be maintained for 5 minutes.
To continue cooking:
Close the door and press the Jet Start but-
ton. The cooking is resumed from where it was
paused.
If you don’t want to continue cooking
you can:
Remove the food, close the door and press the
Stop button.
When the cooking is finished:
The display will show the text “End”. An acous-
tic beep will signal once a minute for 2 minutes.
Please note that reducing or stopping this pro-
grammed cooling cycle will not have a negative
impact on the functioning of the product.
i
stAnd-BY mOdE
The oven is in Stand-by mode when the clock
is displayed (or, if the clock has not been set,
when the display will show “:”).
DOOR
CLOCK
•
When plug in, the screen shows “12:00”
( “12” flashing ), 1 minute later return to
standby (before returning standby can directly
set clock).
•
In the process of cooking, press Stop button
once to pause, press Jet Start button to con-
tinue cooking, but press Stop twice to cancel
this program.
•
In the process of cooking set, no operating
system automatically return to standby mode
in 1 minute.
To set the Clock of your appliance:
1. In standby, touch the Clock button once.
The display shows the current clock.
2. Press + / - to set the hour.
3.
Press Clock/JET START button to confirm.
4. Press + / - to set the minute.
5.
Press Clock/JET START button to confirm
the setting.
Note:
Every time after cooking process is completed,
the screen shows “End” and issued a prompt
until opened the door to return standby (no op-
eration for 10 minutes automatically return to
standby).
88
en
hotpoint.co.uk
