6
GB
4
. Set the cooking duration using the
-
and
+
buttons.
5. Confirm by pressing the
button.
The timer begins counting down immediately. A
buzzer sounds for approximately 1 minute and the
cooking zone switches off when the set programme
has finished.
Repeat the above procedure for each hotplate you
wish to programme.
U
sin
g
mu
ltiple
p
r
o
g
r
a
mm
es
and
the
displa
y
If one or more hotplates are programmed, the display
will show the data for the hotplate with the least time
remaining, and the light corresponding to the position
of the hotplate will flash. The lights corresponding to
the other hotplates programmed will be switched on.
To display the time remaining for the other
programmed hotplates, press the
button
repeatedly. The times remaining for each hotplate will
be shown in a clockwise order, beginning with the front
left hotplate.
Chan
g
in
g
the
p
r
o
g
r
a
mm
e
1. Press the
button repeatedly until the duration
you wish to change is shown.
2
. Use the
buttons to set the new duration.
3
. Confirm by pressing the
button.
To cancel a programme, follow the above instructions.
At step
2
, press the
-
button: the duration decreases
progressively until it reaches 0 and switches off. The
programme resets and the display exits programming
mode.
T
i
m
e
r
The hob must be switched on.
The timer can be used to set a duration up to 99
minutes.
1. Press the
programming button until the timer
indicator light is illuminated.
2
. Set the desired duration using the
-
and
+
buttons.
3
. Confirm by pressing the
button.
The timer begins counting down immediately. When
the time has elapsed, a buzzer will sound (for one
minute).
C
ont
r
ol
p
an
e
l
lo
c
k
When the hob is switched on, it is possible to lock the
oven controls in order to avoid accidental changes
being made to the settings (by children, during
cleaning, etc.). Press the
button to lock the
control panel: the indicator light above the button will
switch on.
To use any of the controls (e.g. to stop cooking), you
must switch off this function. Press the
button for
a few moments, the indicator light will switch off and
the lock function will be removed.
Sw
it
c
h
in
g
o
ff
t
h
e
h
o
b
Press the
button to switch the appliance off.
If the control panel lock has been activated, the
controls will continue to be locked even after the hob is
switched on again. In order to switch the hob on again,
you must first remove the lock function.
D
e
m
o
m
o
d
e
It is possible to set the hob to a demonstration mode
where all the controls work normally but the heating
elements do not switch on. To activate the demo
mode the hob must be switched on, with all the
hotplates switched off.
Press and hold the
+
and
-
buttons
simultaneously for
6
seconds. When the
6
seconds
have elapsed, the ON/O
FF
and CONTROLS
LOCKED indicator lights will flash for one second.
Release the
+
and
-
buttons and press the
button;
The display will show the text DE and MO and the
hob will be switched off.
When the hob is switched on again it will be set to
the demo mode.
To exit this mode, follow the procedure described
above. The display will show the text DE and O
F
and
the hob will be switched off. When it is next switched
on, the hob will function normally.
All manuals and user guides at all-guides.com
all-guides.com
