background image

18

Options

Variable spin speed 
This is only available on Models WMA32 and WMA33
Use this control to reduce the programme spin speed only.
If you leave this in the maximum position (1300), the spin will
be the maximum which is appropriate for whatever wash
programme you have chosen.
When the wash has finished return the dial to the original
setting i.e 1300.
Note: You cannot alter the spin speed while the machine
is spinning.

Variable temperature 
This is only available on Model WMA33
Use this control to reduce the wash temperature only.
If you leave this in the maximum position (95), the actual
wash temperature will be the maximum which is
appropriate for the wash programme which you have
chosen.
When the wash has finished return the dial to the original
setting i.e. 95.
Note: You cannot alter the temperature while the
machine is washing.

Automatic Features

Auto half load
Auto half load saves you time and money when washing smaller loads. Water levels are
automatically adjusted to cater for the different loads.

Unbalanced load warning
Your machine has an inbuilt feature to prevent it spinning with an unbalanced load.
This will minimise vibration and prolong the life of the machine.
If a load is not evenly distributed, the machine will try to spread it around the drum.
The ‘Final Spin’ indicator light will flash at the end of the programme if the machine
does not spin. You can open the door, re-distribute the clothes , close the door and
spin them by using a fast or slow spin programme.

PROGR

AMMES

& OPTIONS

*Vogue aquarius 1666200001-09  04/04/2002  8:58 am  Page 18

Summary of Contents for Aquarius WMA30

























Reviews: