Option modifiers
!
Not all options can be used on all programmes -
(
see Programme Table for option availability
).
●
Wash Enhance:
Use this option to select a more intensive wash programme for the cotton 60˚C and cotton 40˚C for more
heavily soiled items. Additionally, use this option on the machine wash wool programme to select the special
Handwash wool programme for wool items that are not marked as machine washable. This cycle has been
approved by Woolmark for the Gold Care award.
●
Reduced Creases:
Selecting this option will run the wash programme with a more gentle action and lower spin speed, in addition
to carrying out an additional rinse to ensure your laundry has fewer creases and will require less ironing.
●
Rinse Hold:
Selecting this option will pause the cycle in the final rinse with the fabric conditioner keeping the laundry
fresh until you are ready to complete the programme. The Rinse Hold light will flash to indicate the cycle is
paused. The machine will stay in this state, tumbling the load occasionally until either the Start/Cancel button
is pressed or the Rinse Hold button is pressed again to continue the cycle.
●
Mini Load:
Use this option for smaller loads less than the capacity listed for the material and programme type (
see
Programmes Table
). This option reduces water consumption and washing time, saving energy when washing
smaller loads.
●
Extra Rinse:
Provides a full extra rinse to ensure the maximum possible detergent removal, particularly useful for people
with sensitive skin.
●
Variable Temperature:
Use this option to reduce the wash temperature below the maximum for the programme you have chosen.
- Turn the dial to the reduced temperature required.
When the programme has finished reset the dial to 95. If the dial is left at maximum (95), the wash
temperature will be the maximum for the chosen programme.
●
Variable Spin Speed:
Use this option to reduce the spin speed below the maximum for the programme you have chosen.
- Turn the dial to reduced spin speed required.
When the programme has finished reset the dial to maximum. If the dial is left at maximum, the spin
speed will be the maximum for the chosen programme.
11
Description
C
ont
ents
Programmes
and
Option
Modif
iers
C
ontrol
Panel
F
eatures
Installation
Det
ergents
C
are
and
Maint
enanc
e
Prec
autions
and
A
dvic
e
Something
Wrong?
-
Troubleshooting
Servic
e
GB
Option Modifiers and
Special Features
