background image

GB

8

Running  a  wash  cycle

Note:

the  first  time  you  use  the  washing  machine,

add detergent and run an empty 90°C cotton wash

cycle  without  the  pre-wash  phase.

1.

SWITCH  ON  THE  MACHINE.

Press  the 

button. All the indicator lights will illuminate for  1

second, after which the light corresponding to

the   button will remain lit constantly, while the

START/PAUSE  indicator  light  will  flash  slowly.

2.

LOAD  THE  LAUNDRY.

Open  the  porthole  door.

Load  the  laundry,  making  sure  that  the  maximum

load quantity indicated in the table of

programmes  (below)  is  not  exceeded.

3.

MEASURE  OUT  THE  DETERGENT.

Pull  out  the

drawer and pour the detergent into the relevant

compartments  as  described  in  “

Description  of

the  machine

”.

4.

CLOSE  THE  PORTHOLE  DOOR.

5.

CHOOSE  THE  PROGRAMME.

Turn  the

PROGRAMME knob left or right to select the

required  programme,  to  which  a  set  temperature,

spin speed and wash intensity are linked (these

values  may  all  be  modified).

6.

PERSONALISE  THE  WASH  CYCLE.

Use  the

relevant buttons on the control panel:

Modify  the  temperature  and/or  the

spin  speed.

 

The  machine  automatically  selects

the temperature and the maximum spin speed for

the programme set and these values may not be

increased. By pressing the 

 button, the tempe-

rature can be progressively reduced or even set

to cold wash (NO HEAT). By pressing the   button,

the spin speed can be progressively reduced or

even eliminated altogether (NO SPIN). If the

buttons  are  pressed  again  the  maximum  values

are  restored.

Exception: if the “WHITES” programme is

selected,  the  temperature  can  be  increased  up

to a value of 90°C.

Adjust  the  intensity  of  the  wash.

The  machine  automatically  selects  the  optimal

wash  cycle  intensity  for  a  normal  level  of  soiling

in relation to the programme selected. It is

nevertheless  possible  to  increase  (for  heavily

soiled  laundry)  or  decrease  (for  lightly  soiled

laundry) the intensity level of the wash by

pressing the INTENSITY 

 button: this

adjustment  varies  the  duration  of  the

mechanical stage of the wash cycle. In order to

ensure  a  delicate  wash  remains  guaranteed,  it  is

not possible to increase the value of the "LOW"

pre-set  wash  cycle  intensity  for  the  "Fast  Wash",

"Silk"  and  "Wool"  programmes.  This  function  is

not enabled in the "Rinse & Spin programmes".

 

 

 

Modify  the  cycle  caracteristics.

Press the OPTION buttons to personalise the

wash  cycle  according  to  your  own  requirements.

_

Press the button to activate the option; the

corresponding  indicator  light  will  illuminate.

_

Press the button again to deactivate the

option;  the  indicator  light  will  switch  off.

If the selected option is not compatible with the

set programme, the indicator light will flash and

the option will not be activated.

If the selected option is not compatible with

another  previously  selected  option,  the  indicator

light corresponding to the first option will flash

and only the second option will be activated (the

corresponding indicator light will remain lit in a

fixed  manner).

7.

START  THE  PROGRAMME.

Press  the  START/

PAUSE  button.  The  corresponding  indicator  light

remains lit in a fixed manner and the porthole

door locks (the DOOR LOCKED indicator light

illuminates).  The  icons  corresponding  to  the

different wash phases will light up during the

cycle,  indicating  the  progress.  To  change  a

programme while a cycle is in progress, 

pause

the washing machine

 by pressing the START/

PAUSE button; then select the desired cycle and

press the START/PAUSE button again.

To open the door while a cycle is in progress

press the START/PAUSE button; if the DOOR

LOCKED 

 indicator light switches off it is

possible to open the door. Press the START/

PAUSE button again to restart the programme

from the point at which it was interrupted.

8.

PROGRAMME  END.

The  text  END  lights  up  to

indicate that the programme has ended. The

porthole door may be opened immediately. If the

START/PAUSE  button  flashes,  press  the  button

to end the cycle. open the door, unload the

laundry  and  switch  off  the  machine.

If you wish to cancel a cycle that has already

begun, press and hold the   button. The cycle will

be stopped and the machine will switch off.

BAG  FOR  QUILTS,  CURTAINS  AND  DELICATE

G A R M E N T S

Hotpoint has made it easier for you to wash even

the  most  valuable  and  delicate  garments  in

complete confidence thanks to the special bag

which protects the laundry (this is supplied with the

machine).
We recommend that the bag is used every time you

wash 

quilts and padded items with an outer layer

made using synthetic material.

Summary of Contents for AQGL 129 PM

















Reviews: