![Hotpoint 6685X Instructions For Installation And Use Manual Download Page 14](http://html.mh-extra.com/html/hotpoint/6685x/6685x_instructions-for-installation-and-use-manual_2167174014.webp)
14
CHAPTER 2 – USING THE CONTROLS AND MODES
2.1 SETTING THE CLOCK
(for key references see page 7)
•
When the appliance is connected to the domestic power supply for the first time, or after a power cut,
four dashes will appear on the display (----).
In order to set the clock, proceed as described below:
Press the key (6).
(The hours flash on display 1)
1
Set the desired time by turning
the
knob (14).
(The hours flash on display 1)
2
Press the key (6) again.
(The minutes flash on display 1)
3
Set the desired minutes by
turning the
knob (14)
(The minutes flash on display 1)
4
Press the key (6) again.
(The display shows the time set)
5
•
If you wish to change the hour on the dial once it has been set, press the key (6) before pro-
ceeding to set the new time as described above.
•
It is possible to display the current time even after starting the mode set, by pressing the key (6)
(the time is displayed for 2 seconds).