Hotpoint Ariston WMF 700, Instructions For Use Manual

Page: 9 / 36

9
GB
Wash cycles and options
Table of programmes and wash cycles
W
ash cycles
Description of the wash cycle
Max.
temp.
(°C)
Max.
speed
(rpm)
Detergents
Max. load (kg)
Residual dam-
pness%
Energy con- sumptionkWh
Total water lt
Cycle duration
Pr
ewash
W
ash
Bleach
Fabric
softener
1 Anti Stain 40° 1000
 
-

4 - - - 180’
2 Whites 60° 1000
 
-

4 - - - 180’
Cotton Standard 60°
(1):
heavily soiled whites and resistant colours.
60°
(Max. 90°)
1000

(3)
  
7 62 1.31 58 195’
Cotton Standard 40° (2): lightly soiled resistant and delicate colours.
40° 1000 -
  
7 62 1.09 92 190’
5 Synthetics: heavily soiled resistant colours.
60° 800
   
3.5 44 0.93 47 110’
5 Synthetics (4): lightly soiled resistant colours. 40° 800
   
3.5 44 0.57 46 95’
6
Anti allergy
60° 1000 -
  
4 - - - 195’
7 Baby 40° 1000     4 - - - 145’
8 Wool: for wool, cashmere, etc. 40° 800 -

-

1.5 - - - 70’
9 Delicates 30° 0 -  -  1 - - - 80’
10
Fast Wash 60’: to refresh normal soiled garments quickly (not
suitable for wool, silk and clothes which require washing by hand).
60° 1000 -  -  3.5 62 0.81 40 60’
11 Cotton Standard 20°: lightly soiled resistant and delicate colours.
20° 1000 -
  
7 - - - 170’
12
Eco Cottons
Cold
Water
1000 -

-

7 62 0.17 63 80’
13 Eco Synthetics
Cold
Water
800 -

-

3 48 0.07 30 70’
14
Eco Fast 30’
Cold
Water
800 -

-

3 71 0.04 34 30’
Rinse
- 1000 - - -

7 - - - 36’
Spin and Pump out - 1000 - - - - 7 - - - 16’
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary accor-
ding to factors such as water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.
1) Test wash cycle in compliance with directive 1061/2010: set wash cycle with a temperature of 60°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for
garments which can be washed at 60°C . The actual washing temperature may differ from the indicated value.
2) Test wash cycle in compliance with directive 1061/2010: set wash cycle with a temperature of 40°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for
garments which can be washed at 40°C . The actual washing temperature may differ from the indicated value.
3) At 60 °C the “Prewash” function cannot be selected.
For all Test Institutes:
2) Long wash cycle for cottons: set wash cycle with a temperature of 40°C.
4) Long wash cycle for synthetics: set wash cycle 5 with a temperature of 40°C.
Wash option
Prewash
If this function is selected, the pre-wash cycle will run;
this is useful for removing stubborn stains.
N.B.: Put the detergent in the relevant compartment.
! It cannot be used in conjunction with wash cycles
(60°), ,
6, 8, 9, 10, 11, 12, 13, 14, , .