Hotpoint Ariston RZ 1047 W, Instructions For Use Manual, Page: 11 / 72

GB
11
2. STATISTICS
You can access the STATISTICS section either by
choosing the item on the SERVICES menu or by pressing
the button
on the control panel, for direct access to
the section.
2.1 SERVICES menu screen with the average
consumption item highlighted.
2.2 SERVICES menu screen with the counters item
highlighted.
There are two types of statistics: average consumption
and counters. Both consider completed cycles only.
AVERAGE CONSUMPTION
Select AVERAGE CONSUMPTION to display the average
consumption of electricity (kWh) and water (litres) for the
last 20 cycles run. The trend of the average compared
with the previously reported averages is displayed
alongside the average value, to indicate whether
consumption is increasing or decreasing: an upwards red
arrow indicates that average consumption is increasing
and a downwards green arrow indicates that average
consumption is decreasing (this indication will start after
the 20th cycle).
2.3 Average consumption screen .
COUNTERS
Select the COUNTERS item to display:
• KWh: total kWh consumed (up to the last cycle).
• Litres: total litres of water consumed (up to the last
cycle).
• N° cycles run (up to the last cycle).
2.4 Counters screen
There are two types of the above 3 counters:
• TOTAL: these are calculated from when the product
is installed.
• PARTIAL: these are calculated when the counters
have been zeroed using the “RESET” button.
AVERAGE CONSUMPTION
No. of cycles