
20
GB
WATER LEVEL
MAX
W
A
TER LEVEL
MAX
W
A
TER LEVEL
MAX
the lowest bin and the special COOL CARE ZONE bin,
which has an adjustable temperature) and place the
food directly onto the evaporator plates.
!
Do not open the door during freezing.
!
If there is a power cut or malfunction, do not open the
freezer door. This will help maintain the temperature inside
the freezer, ensuring that foods are conserved for at least 9
-14 hours.
Cool Care Zone
The Cool Care Zone is a special compartment in the
freezer which allows the user to choose between 4
different operating modes that may be set according to
specific requirements and the type of food stored inside.
The temperature settings that may be selected are -8°C, -
12°C and -18°C, indicated by the icons depicting a
strawberry, an ice cream and a bottle on the control
panel. The Cool Care Zone is equipped with controls that
may be operated independently from the other
compartments inside the freezer, by the Cool Care Zone
may also be deactivated using the control panel, so that it
can then be used as a normal freezer compartment.
ICE CARE tray
The fact that they are situated on the top part of the
freezer drawers ensures greater cleanliness: the ice no
longer comes into contact with the food placed inside the
freezer compartment; furthermore, the dripping of the
water during filling is avoided (a lid to cover up the hole
after filling with water is also provided).
1. Pull out the tray by pushing it up.
Check that the tray is ompletely empty and fill it with
water through the opening provided.
2. Take care not to exceed the level indicated (MAX
WATER LEVEL). Excess water prevents the ice cubes
from dispensing (if this happens, wait for the ice to melt
and empty the tray).
3. Turn the tray 90°: due to the connected compartments
each mould fills with water (
see diagram
).
4. Close the opening with the lid provided and put the tray
back.
5. When the ice has formed (minimum time approximately
8 hours) knock the tray against a hard surface and wet
the outside so that the ice cubes come loose and take
them out through the opening.