![Hotpoint Ariston HAQ9 E1L User Instructions Download Page 11](http://html.mh-extra.com/html/hotpoint-ariston/haq9-e1l/haq9-e1l_user-instructions_2169780011.webp)
11
Electrical Requirements (Great Britain and Ireland only)
IMPORTANT:
This refrigerator must be earthed.
Fuse Replacement
If main lead of this refrigerator is fitted with a BS1363A, 13 A
fused plug, to replace a fuse in this type plug use an A.S.T.A.
approved fuse to BS 1362 type and proceed as follows:
1.
Remove fuse cover (A) and fuse (B).
2.
Fit replacement 13 A fuse into fuse cover.
3.
Reinsert both fuse and its cover into plug.
IMPORTANT:
The fuse cover must be refitted when changing a
fuse. If fuse cover is lost, plug must not be used until a correct
replacement cover is fitted. A correct replacement is identified by
colour insert or colour “word” embossed on the base of plug.
Replacement fuse covers are available at your local electrical
shop.
For the Republic of Ireland (only):
The information given in respect of Great Britain will frequently
apply, but a third type of plug and socket is also used, the 2-pin,
side earth type.
Socket/Plug (valid for both countries):
If fitted plug is not suitable for your socket, please contact After-
sales Service for further instruction. Please do not attempt to
change plug yourself. This procedure needs to be carried out
by a qualified technician in compliance with the manufacturer’s
instructions and current standard safety regulations.
Temperature
This refrigerator is designed for operation in places where the
temperature comes within following ranges, according to climatic
class shown on the rating plate. The refrigerator may not work
properly if it is left for a long time at a temperature outside the
specified range.
NOTE:
It is recommended that you do not install the refrigerator
near a heat source, such as an oven or radiator.
Climatic Class
Amb. T. (°C)
Amb. T. (°F)
SN
From 10 to 32
From 50 to 90
N
From 16 to 32
From 61 to 90
ST
From 16 to 38
From 61 to 100
T
From 16 to 43
From 61 to 110
A. Fuse cover
B. Fuse
A
B
21-Apr-2018 01:11:37 EDT | RELEASED
In some European factories the letter "W" of the part code mentioned herein will be automatically
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")