EN
7
Wash options
Extra rinse
By selecting this option, the efficiency of the rinse is
increased and optimal residual detergent removal is
guaranteed. It is particularly useful for skin which is
sensitive to detergents. We recommend this option is used
with a full load of washing, or when a large amount of
detergent is required.
!
It cannot be used in conjunction with
,
,
,
,
.
Easy Iron
By selecting this option, the wash and spin cycles will be
modified in order to reduce the formation of creases.
At the end of the cycle the washing machine drum will
rotate slowly
; the “Easy Iron” and START/PAUSE indicator
lights will flash. To end the cycle press the START/PAUSE
button or the “Easy Iron” button.
!
It cannot be used in conjunction with
,
, ,
,
.
Super Wash
This option offers a high-performance wash due to the
greater quantity of water used in the initial phase of the
cycle, and due to the increased wash cycle duration, is
particularly useful for the removal of stubborn stains. It can
be used
with
or
without
bleach.
If you desire bleaching, insert
the extra tray compartment
(
3
) into compartment
1
.
When pouring in the bleach,
be careful not to exceed the
“max” level marked on the
central pivot
(see figure).
To
bleach laundry without
carrying out a full wash
cycle
, pour the bleach into
the extra compartment
3
,
select the “Rinse” cycle” and activate the “Super Wash”
option .
!
It cannot be used in conjunction with
,
,
,
, ,
,
, ,
.
Time Saver
If you select this option, the wash cycle duration will be
reduced by up to 50%, depending on the selected cycle,
thereby guaranteeing simultaneous water and energy
saving. Use this cycle for lightly soiled garments.
!
It cannot be used in conjunction with
,
,
,
,
,
, , ,
.
3
1
2
Wash cycles and options
(*) Note: 10 minutes after the START, the machine will recalculate the time remaining until the end of the wash cycle on the basis of the load inside it; this value will then be shown on the display.
Table of wash cycles
For all Test Institutes:
1) Test wash cycle in compliance with regulation 2010/1061: set wash cycle with a temperature of 60°C.
2) Test wash cycle in compliance with regulation 2010/1061: set wash cycle with a temperature of 40°C.
3) Long wash cycle for cottons: set wash cycle with a temperature of 40°C.
4) Short wash cycle for cottons: set wash cycle
with a temperature of 40°C.
5) Long wash cycle for synthetics: set wash cycle with a temperature of 40°C.
Icon Description of the wash cycle
Max. temp.
(°C)
Max.
speed
(rpm)
Detergent and additives
Max.
load
(kg)
Cycle
duration
Prewash Wash Bleach
Fabric
softener
Cotton (2-3):
lightly soiled whites and delicate colours.
40°
1600
-
10
Synthetics
Resistent
60°
800
-
5
Synthetics
Resistent
(5)
40°
800
-
5
Whites
60°
1600
-
-
6
Coloureds (4)
40°
1600
-
6
Darks
30°
800
-
-
6
Shirts
40°
600
-
2,5
Duvets:
for down-stuffed garments.
30°
1200
-
-
3,5
Bed&Bath
for bedlinen and towels.
60°
1600
-
10
Rinse
-
1600
-
-
10
Spin
and
Pump out
-
1600
-
-
-
-
10
Anti allergy
60°
1600
-
-
6
Ultradelicates
30°
0
-
-
1
Wool:
for wool, cashmere, etc.
40°
800
-
-
2,5
Mix 30':
to refresh lightly soiled garments quickly (not suita-
ble for wool, silk and clothes which require washing by hand).
30°
800
-
-
4
Cotton
Prewash
(Add detergent to the relevant compartment).
90°
1600
-
10
Cotton
(1):
heavily soiled whites and resistant colours.
60°
(Max. 90°C)
1600
-
10
(*) The duration of the wash cycles can be checked on the display
.
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary according to factors such as
water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.
