Hotone Omni AC, Owner'S Manual

Page: 7 / 9

Edit
Save
DESIGN INSPIRATION
Preset Edit Menu:
1- Return to previous menu
2- Indicates current cursor position (the PRESET VOL is now selected).
In this menu, turn FUNC. knob to select a parameter (hollow cursor) or edit parameters (solid cursor), press the FUNC. knob to confirm selection/finish
editing.
All available parameters are shown below:
(1) PRESET VOL: Controls the current preset volume
(2) EQ: Switches the EQ on/off
(3) MODE: Selects a mode for your instruments
- EGT: for using with electric instruments
- AGT: for using with acoustic instruments
(4) LOW FREQ
：
Controls the EQ low frequency range
(5) LOW GAIN
：
Controls the EQ low frequency boost/cut amount
(6) MID FREQ: Controls the EQ mid frequency range
(7) MID GAIN
：
Controls the EQ mid frequency boost/cut amount
(8) HIGH FREQ
：
Controls the EQ high frequency range
(9) HIGH GAIN
：
Controls the EQ high frequency boost/cut amount
(10) PRES FREQ
：
Controls the EQ presence range
(11) PRES GAIN
：
Controls the EQ presence boost/cut amount
(12) SAVE
：
Enter Save Menu
The EQ frequency and boost/cut range are shown below:
BAND FREQ range GAIN range
LOW 50Hz-500Hz measured by 10Hz -12~0~+12(dB)
MID 500Hz-1kHz measured by 10Hz -12~0~+12(dB)
HIGH 1kHz-5kHz measured by 0.1kHz -12~0~+12(dB)
PRES 5kHz-16kHz measured by 0.1kHz -12~0~+12(dB)
To enter Save Menu, select SAVE in Preset Edit Menu or hold FUNC. knob in Effect Select menu. The screen will come up as shown below:
Turn FUNC. knob to choose a location. Press the FUNC. knob to confirm saving.
Press the footswitch to cancel saving.
·5·
Assign Footswitch Function
In Edit Menu, select FS FUNCTION to enter Footswitch Function Assign Menu. The screen will come up as shown below:
You can assign 2 different functions to FS TAP (tap the footswitch) and FS HOLD (hold the footswitch):
●
MUTE
●
BYPASS
●
●
PRESET –
●
MODE
The functions cannot be same.
1
2