16
02 How to Use
Press the
∨
end to turn in or tighten screws.
Press the
∧
end to loosen or remove screws.
Forward/Reverse rotation button
Bits are stored in the base magnetically. The
screwdriver bit is removed from a storage box, and
the bit is inserted into the bit holder.
After the bit is inserted into the bit holder, it is
magnetized in the middle magnetizing area.
Magnetic force can be generated, and most screws
can be attached by the magnetic force.
How to Use the Screwdriver
When the bit magnetism is insufficient, the bit can be
magnetized in time by placing the bit top at the
magnet of the receiving tank for 5S. The magnetic
force of the bit will decrease when stored for a long
time, so the bit should be regularly magnetized.
Magnetizing
If the battery level is below 20% when the screwdriver is in use,
the indicator will blink red quickly for 5 seconds, and it will turn off
when the button is released. Please charge the battery in time.
When charging, the indicator will slowly blink red.
When the battery is fully charged, the indicator will stay white.
Indicator status
