CONTENTS
2 X 30cm LONG CHAINS
2 X LEGS
4 X SCREWS
FIXING THE CHAINS
CONTACT YOUR GREENHOUSE MANUFAC-
TURER
FOR THE BEST WAY TO FIX THE CHAINS TO
THE STRUCTURE. THEN ATTACH THE
CHAIN TO THE HOLES PROVIDED ON THE
TOP OF THE APPLIANCE AS INDICATED.
TO FIX LEGS
REMOVE THE LEGS AND SCREWS FROM
BAG.
USING A POZI SCREWDRIVER FIX THE
LEGS TO UNDERSIDE OF THE STAINLESS
STEEL BODY.
SAFETY
WARNING - IN ORDER TO AVOID OVER HEATING DO NOT COVER THE HEATER.
Although all of our products are designed for use in a greenhouse environment and are
made to very high standards, it is essential that all users are conscious of the possible
dangers of using any electrical appliance in damp conditions such as those that prevail in
greenhouses. It is advisable to turn off, unplug and remove the appliance when watering
in the greenhouse. If the appliance does get wet it must be thoroughly dried out before
further use.
Allow the appliance to cool before cleaning.
If the appliance is run continuously it is recommended that it is monitored or checked
regularly or at least every 8 hours or so.
CAUTION - SOME PARTS OF THIS PRODUCT CAN BECOME VERY HOT AND
CAUSE BURNS. PARTICULAR ATTENTION HAS TO BE GIVEN WHERE CHILDREN
AND VULNERABLE PEOPLE ARE PRESENT.
It is strongly recommended that each electrical appliance is used with an R.C.D
(Residual Current Device) suitable for use with portable electrical equipment
outdoors.
It may be necessary to run the heater on FULL for 10 minutes without an RCD to
burn the elements in on the first use.
Made in England by: Kirklees Developments Ltd
Mill 2, St Pegs Mill, Thornhill Beck Lane, Brighouse,
West Yorks, HD6 4AH Tel: + 44 1484 401134
Web: www.kdev.co.uk Email: [email protected]
