14
F6 4-Channel DC Smart Charger
Storage Charging
Storage Charging
LiPo-6S(3.80V)
00:00:19
CH1
0
mAh
22.70
V
0.0
A
0
W
3.806V
3.806V
1
4
3.806V
3.810V
2
5
3.806V
3.811V
3
6
00:00:00
CH2
Standby
Operation and Setup
Working parameters Display
Storage Charging Status : Simple Operation
1. Connect power supply to the charger, wait for the system to complete its self-checking. Con
nect the battery to the charger in the standby interface;
2. After selecting the corresponding channel, short press the speed shuttle key to pop up the
“Task Settings" menu, set the task to “Storage” ; adjust the task parameters, and short
press the speed shuttle key to start the task;
Scroll the speed shuttle key during operation can switch the display information in the lower half of the screen, which are
cell voltage and the operating data ; the cell voltage only be displayed in the mode of balance charging.
3. When the storag
e task is executing, short press the speed shuttle key can pop up the
"Adjust
Task" menu to adjust the storage current ; long press the CH key can stop the current task;
4. Enjoy.
Operation
Time
C a p a c i t y
charged
Task Status
O u t p u t
Current
Total Battery
Voltage
Output
Power
Operation
Time
Cell Voltage
Current
channel
Current
channel
Battery parameters and
Percentage of completion