Always unplug your Power Pack when not in use!
❶
Hand Controllers (2)
❷
Yellow Hand Controller Plugs
❸
Red Power Pack Plug
❹
Terminal Track
❺
Power Pack
❻
Wall Outlet
❼
Direction
of travel
a.
Plug the Power Pack into a convenient wall outlet.
b.
The cables for the Power Pack and the hand controllers
have color-coded plugs to help you make your connections
properly. First, plug the red plug into the red receptacle on
the terminal track. Next, plug the yellow hand controllers
into the yellow receptacles on the terminal track.
c.
To test track and power connections, hold a car on the
track with its metal contacts
touching the metal track rails.
Gently hold the front end of the
car down while lifting the vehicle
as shown (do not lift the vehicle
by its rear tires). Squeeze the
hand controller: the car’s rear
tires should spin. If they don’t, there’s a connection
problem. Carefully check the track and power connections.
d.
Your hand controller is your car’s “throttle.” The more
you squeeze the trigger the faster your car will go. Practice
at a slow speed for a few laps, until you’re ready to race!
3
4
1
2
5
6
A
7
A
SPECIAL NOTE TO ADULTS:
• Always make sure your Race Set is unplugged before
assembling or disassembling track. Always unplug
Power Pack when not in use. Regularly examine for
damage to the cord, plug, enclosure and other parts.
• In the event of any damage, this toy must not be used
with the transformer until the damage has been
repaired.
• Do not connect to more than the recommended
number of power supplies.
• If this toy is being operated in the presence of
children under 8 years old, adult supervision is
recommended.
• This toy is not intended for children under 3 years old.
This toy must be used only with the recommended
transformer. The transformer is not a toy.
• Disconnect from the transformer before cleaning.
CONGRATULATIONS!
You’re ready to race. For “pro” competition, please read
the following driving tips and maintenance hints.
DRIVING TIPS
Here are some “inside” racing tips…for top performance!
1.
Always race on a clean, hard, flat surface. For best
racing performance, we don’t recommend carpeting.
2.
Clean track is IMPORTANT for best performance!
Please refer to the Maintenance section for detailed
instructions for cleaning the track.
3.
Races are won in the curves! Slow down going into the
curves…then speed up coming out of them. Accelerate to
build up speed for loops and jumps.
4
. Anyone can be a “pro” racer – the secret is practice!
Remember to “break in” your new cars with a few “
qualifying” laps. Cars always run better after they’ve
“warmed up.”
5.
Experienced racers know that regular maintenance is
the key to top racing performance. Read and follow the
easy steps in Section II.
6.
If you have questions or difficulty operating your Race
Set, check the Troubleshooting Chart first. Usually a quick
“pit stop” will get you racing again!
