6
II.
POWER SAW JUMP
1.5 Vd.c.
D
DD
l
m
III.
GEAR-GRINDING GAUNTLET
S
o
S
n
IV.
CARDBOARD
q
p
Jump
Gauntlet
Cardboard
BATTERY INSTALLATION
• Turn the jump assembly over. Open battery door. Insert
1 AA battery, with polarity as shown inside battery
compartment. Close battery door.
Battery Safety Information
• Insure that battery polarity is correct.
• Use only batteries of the type recommended (or equivalent).
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cad-
mium) batteries.
• Remove used-up batteries immediately. Remove batteries if vehicle will
not be used for a long period.
• Do not recharge non-rechargeable batteries.
• Do not short-circuit terminals.
• Remove rechargeable batteries before recharging (if the batteries are
designed to be removable).
• Recharge batteries only under adult supervision (if the batteries are
designed to be removable).
• Dispose of batteries safely. Do not dispose of batteries (or products con-
taining non-replaceable batteries) in fire, as batteries may explode or leak.
Battery Performance Note:
For best performance use alkaline batteries (where disposable batteries are
called for). Battery life may vary depending on battery brand.
• The Robot Gauntlet Assemblies clip to the underside of the
track as shown.
• Attach cardboard as shown.
JJ
L
DD
D
ON/OFF
