A.
A
A.
B
B
A.
F
A.
C
A.
D
A.
E
STRAIGHTAWAY
SECTION
You
Are
Here
Now let’s assemble the straightaway section. The following
drawings show you, step by step, how to assemble this
section.
Take your time, and refer to the Layout Drawings
on the Assembly Map if you need to.
b
4 x GUARDRAILS
4 x 9" RADIUS CURVE
2 x 15" STRAIGHT
2 x #2 SUPPORTS
2
1 x 9" STRAIGHT
1 x #3 SUPPORTS
3
1 x #4 SUPPORTS
4
1 x #5 SUPPORTS
5
These are the pieces you’ll need to assemble this section.
a
D
F
B
F
D
F
F
Assemble the track pieces as shown.
Add 4 guardrails as shown. To attach a guardrail:
gently flex the guardrail before attaching it.
Carefully attach the bottom of the guardrail first.
Then pull up and snap into place. Don’t force
guardrails into place.
This track section uses several supports. Attach
them as shown. To assemble a track support, sepa-
rate the pieces as shown and snap off the connec-
tor tabs (discard the tabs). Next, fit the two pieces
together as shown. Insert the assembled track
support into the round hole on the underside of the
track as shown.
c
5
4
5
2
2
3
Now attach the straightaway section to the loop
section, and set the assembled track aside. Let’s
go on to the Cliff Hangers
®
section.
B1964-0920G1 DAREDEVIL CHALLENG 2/21/03 9:55 AM Page 3
