Maintenance
KDAR Company
Checking and Replacing Outside Nozzle,
Tip, Air Diffuser and Electrode
1. Torch Handle/ Complete Hose Part # 23218
2. Shield Cup/Cover Part # 23217
3. Copper Cutting Tip Part # 23216
4. Air Diffuser Part # 23214
5. Electrode Part # 23215
After 20 Hours of Operation
Remove Shield Cup (2), inspect for cracks and replace
if necessary.
Remove and check copper cutting tip (3). Replace if
the opening is deformed or 50% oversized. If dirty but
not deformed or oversized, the tip can be cleaned and
used.
Check the electrode (5) and replace if the center has a
pit that is more then 1/16” deep or has worn down
more than 1/16”.
Check Air Diffuser for cracks, replace if cracked or
chipped.
Electric Shock Can Kill
Do not touch live electrical parts of the electrode with skin or wet clothing.
Insulate yourself from work and ground.
Always wear insulated gloves and keep them dry.
Warning
Hot Parts Can Cause Serious Burns
Do not touch hat parts without wearing protection.
Allow the torch to cool sufficiently before working with parts that could potentially be
Plasma Arc Can Injure
Turn off power source and unplug
unit when dis-assembling torch han-
dle or replacing components of the
torch.
13
2.
3.
4.
5.
1.
PARTS:
