Hospira GemStar Series, System Operating Manual

Page: 129 / 221

Chapter 10. Options Menu
120 Hospira GemStar System Operating Manual
Sound Level
1
Press [
OPTIONS
] and select
PUMP SETTINGS
.
2
Select
SOUND LEVEL
from the Pump Settings Menu.
3
When the pump displays the Sound Level function, it
sounds intermittent beeps at the current sound level.
The blocks on the top line of the display indicate the
current sound level.
• Press to increase the sound level.
• Press to decrease the sound level.
• Press [ CHANGE ] to restore the sound level to the default setting.
4
Press [
YES/ENTER
] when done.
Set Clock
1
Press [
OPTIONS
] and select
SET CLOCK
.
2
Select 12-Hour or 24-Hour format (24-Hour format is
shown in example).
3
Use the arrow keys to set the weekday and month.
4
Use the number keys to enter the current day, year,
and time.
5
Press [
YES/ENTER
] to confirm.
d Note: The alarm cannot be turned off completely. The alarm automatically reverts
to the maximum volume if the user does not respond within one minute.
d
Note: When entering the time in 12-Hour format,
press
or to toggle between AM and PM.
d Note: The clock cannot be changed while an intermittent
or variable time program is in progress.
f
Tip: To view the clock from the RUN or STOP mode,
press [ YES/ENTER ], then immediately press and
HOLD [ 1 ]. The clock displays until [ 1 ] is released.
-

+
USE TO ADJUST
THE SOUND LEVEL
ENTER WHEN DONE
1 REVIEW PROGRAM
2 HISTORIES
3 KEYPAD LOCK
4 PUMP SETTINGS
5 SET CLOCK
6 PRINT
7 SPEED PROTOCOL
8 NEXT DOSE
SET CLOCK TYPE
1 SELECT 12 HOUR
2 SELECT 24 HOUR
TIME IS 20:35
MON, JUL 26, 06
ENTER TO CONFIRM