DISCONNECT UNIT FROM POWER SUPPLY BEFORE DOING ANY SERVICE
Instructions to Replace Compressor
12. Separate the
discharge tubing
from the
compressor
evaporation tray.
13. Use a knife to cut
the double sided
tape that holds in
place evaporator tray
pan on the
compressor.
14. Warm the brazing of
the discharge and
suction tubes in
order to unsolder
them from the
compressor.
15. To remove the filter
dryer, slowly warm
up the joint of the
capillary tubing with
the filter dryer and
pull them apart by
using pliers.
16. Remove the four
clips, pins and
washers that secure
the compressor to
the base rails.
Summary of Contents for RM-26
Page 1: ...SERVICE MANUAL FOR MODEL RM 26...
Page 36: ......
