13
ELECTRICAL INSTALLATION
WARNING
•
Electrical connection must meet national, state, and local electrical code
requirements. Failure to meet these code requirements could result in
death, electric shock, serious injury, fire, or severe damage to equipment.
•
This appliance requires an independent power supply of proper
capacity. See the nameplate for electrical specifications. Failure to use
an independent power supply of proper capacity can result in a tripped
breaker, blown fuse, damage to existing wiring, or component failure.
This could lead to heat generation or fire.
•
THIS APPLIANCE MUST BE GROUNDED:
This appliance is equipped with a
NEMA 5-15 three-prong grounding plug to reduce the risk of potential
shock hazards. It must be plugged into a properly grounded, independent
3-prong wall outlet. If the outlet is a 2-prong outlet, it is your personal
responsibility to have a qualified electrician replace it with a properly
grounded, independent 3-prong wall outlet. Do not remove the ground
prong from the plug and do not use an adapter plug. Failure to follow
these instructions may result in death, electric shock, or fire.
•
To reduce the risk of electric shock, do not touch the power switch or plug
with damp hands.
•
Make sure the power switch is in the “OFF” position before plugging in or
unplugging the appliance to reduce the risk of electric shock.
•
Do not use an extension cord.
•
Do not use an appliance with a damaged power cord. The power cord
should not be altered, jerked, bundled, weighed down, pinched, or
tangled. Such actions could result in electric shock or fire. To unplug the
appliance, be sure to pull the plug, not the cord, and do not jerk the cord.
•
The GREEN ground wire in the factory-installed power cord is connected
to the appliance. If it becomes necessary to remove or replace the power
cord, be sure to connect the power cord’s ground wire.
Electrical Connection
•
Usually an electrical permit and services of a licensed electrician are required.
•
The maximun allowable voltage variation is ± 10 percent of the nameplate
rating.
Summary of Contents for RM-10-HC
Page 2: ...2 RM 7 HC RM 10 HC RM 26 HC RM 49 HC RM 65 HC RM 45 SD HC...
Page 19: ...19...
