13
WARNING, continued
• All foods should be wrapped in plastic film or stored in sealed containers.
Otherwise foods may dry up, pass their smells onto other foods, cause frost
to develop, result in poor appliance performance, or increase the likelihood of
cross-contamination. Certain dressings and food ingredients, if not stored in
sealed containers, may accelerate corrosion of the evaporator, resulting in failure.
• Do not store items near the air outlet. They might freeze up and crack or break
causing a risk of injury or contamination of other food.
NOTICE
• Protect the floor when moving the appliance to prevent damage to the floor.
• Keep ventilation openings, in the appliance enclosure or in the built-in structure,
clear of obstruction. Blockage of airflow could negatively affect performance and
damage the appliance.
• To prevent deformation or cracks, do not spray insecticide onto the plastic parts or
let them come into contact with oil.
• To avoid damage to the gasket, use only the door handle when opening and
closing.
• Do not leave the doors open.
B. Startup
WARNING
All parts are factory-adjusted. Improper adjustments may adversely affect safety,
performance, component life, and warranty coverage.
IMPORTANT
At startup, there is a slight delay before the compressor starts.
1) Reach over the front panel to access the power switch—located on the front of the
control box. See Fig. 4. Make sure the power switch is in the "OFF" position.
WARNING! To reduce the risk of electric shock, do not touch the power switch or
plug with damp hands.
2) Plug the appliance into the electrical outlet.
3) Move the power switch to the "ON" position
to start the cool-down process.
4) Allow the appliance to cool down prior to
loading it with food products.
4A2196-01 1
POWER
OFF
ON
Power
Switch
Front Panel
Fig. 4
