Hoshizaki FM-170EE-50-HC, Service Manual

Page: 25 / 46

22
2) Run the icemaker (for about 10 minutes) until the Compressor and the Gear Motor
stop automatically.
3) Unplug the icemaker and remove the Front Panel (Left).
4) Remove the Inlet Hose from the water tap, and drain the Hose.
5) Unhook the Drain Hose (Water Level Gauge).
6) Drain water, and refit the Drain Hose, the Inlet Hose and the Front Panel in their
correct position.
7) Remove all ice from the Storage Bin. Clean and dry the Bin.
V. MAINTENANCE
WARNING
1. Before carrying out any cleaning or maintenance operations, unplug the
icemaker from the electrical supply network.
2. A trained service person should check and clean the Condenser at least
once a year.
3. This appliance must not be cleaned by use of a water jet.
4. To prevent possible damage, do not clean the plastic parts with water
above 40°C or in a dishwasher.
1. PERIODICAL CLEANING
[1] Exterior
Wipe the exterior at least once per week with a clean, soft cloth. Use a damp cloth
containing a neutral cleaner to wipe off grease or dirt.
[2] Storage Bin Interior Cleaning/Sanitisation (as required)
1) Open the Storage Bin Door, and remove all ice.
2) Remove the Drain Cap located in the base of the Storage Bin.
3) Wash the Bin Liner, Plastic Spill Flap and Drain Cap with a neutral non-abrasive
cleaner. Rinse thoroughly.