7
ENGLISH
5) Part Nos. 5 and 8
After tightening the pack cap nut, insert the pack assy into
the coupling taken out in Step 7 until it clicks.
If the pack assy cannot be inserted, the coupling may be locked.
Press the button as shown to unlock the coupling, and try again.
Step 10 [KM-40/60/80C(-HC)]
Use the two T2 truss head tapping screws (No. 2) to fix
the barrier - spring (No. 5) and barrier - control box (No. 8)
in their correct position as shown.
Screw (2 points)
Barrier - Control Box (No. 8)
Barrier - Spring (No. 5)
Screw (2 points at top and bottom)
